The custom made load cell is extremely durable and much more precise as the one in V2. You can apply a realistic and strong pressure and precisely control the brake with muscle tension just like in a real car.
Advanced Technology
Nothing will make you faster than a set of good pedals. We are using the latest and most advanced technology to give you an advantage.
90 kg Load Cell (adjustable)
Contactless Hall Sensors with 12 bit resolution
The electronics have been completely revised and the magnetic hall sensors of the gas and clutch feature 4x the resolution of the V2 pedals. Each axis can be calibrated in the wheel or in the driver.
Maximum Adjustability
There are countless ways to adjust these pedals according to your racing style and ergonomics.
New Pedal Plates
The new D-shape pedal plates and the new pedal extensions now allow to adjust the angle of the pedal plate and the angle of the whole pedal arm.
Adjustable Brake Stiffness
The completely new design of the brake allows to adjust the stiffness and travel of the brake pedal without using any tools.
Proven Design
The third generation of the ClubSport pedals is still using the simple but proven design of it's legendary predecessors.
Full metal construction
The complete pedal set is made of fine CNC-machined aluminum along with strong steel axis.
Vibration Feedback pedals
The new vibration motor on the gas pedal can be used by games to indicate if you lose grip and should power down. The second motor on the brake could warn you if you brake too hard and lock the tyres.
Features
- High resolution pedals with magnetic and contactless sensors on gas and clutch for a long life and maximum performance
- Pressure sensitive brake with custom made 90 kg load cell sensor
- Adjustable brake stiffness and travel without tools
- 12bit resolution (4096 values) on all axis
- Alternative D-shape race plates in curved design. Ideal for standing pedals
- Pedal extension to adjust the angle of the pedal plate and to change the angle of the whole pedal arm
- Brake sensitivity can be adjusted through the tuning menu of the wheel and during the race
- Vibration motor on throttle pedal indicates rear wheel spin and oversteer (control by games is possible via Fanatec Wheel SDK)
- Vibration motor on brake pedal to simulate ABS and indicate locking tires (controlled by Fanatec wheels: Compatible to all games. Dynamic control by games is possible via Fanatec Wheel SDK)
- Design of the gas pedal allows quick exchange of the springs. Two springs with different strength are included
- Optional damper kit for gas and brake. The hyraulic dampening resistance can easily be adjusted with a knob
- Full multi platform compatibility, depending solely on the platform compatibilities of the connected Wheel Base/Racing Wheel
- Full metal construction of CNC-machined aluminum
- Ultimate adjustability: Position of pedal plates in all directions, angle, spring strength at throttle, brake sensitivity, brake travel
- Compatible to the colour kits to allow perfect optical customisation
Compatibility
Peripherals:
- Compatible to any Fanatec Wheel Base or Fanatec Racing Wheel with RJ12 Pedals connector. To connect Fanatec Wheels with PS/2 Pedal Socket, you need the additional PS/2 to RJ12 cable.
- Compatible to ClubSport Pedals V3 Brake Performance Kit
- Compatible to ClubSport Pedals V3 Damper Kit (throttle and brake pedal)
- Dedicated plug for the ClubSport Handbrake
- The pedals are not compatible to the ClubSport USB Adapter. Please use the included USB connector (PC only).
Platforms:
-
PC:
- If you connect it to a Fanatec Wheel Base / Racing Wheel it will be compatible to all racing games. For that case, please check the compatibility details on the product page of the connected product.
-
It will work with any racing wheel, also of any other brand (Logitech,
Thrustmaster, etc), if the pedals are connected to PC via USB and if the
game supports a second controller. E.g. these PC games support a
second USB controller:
- iRacing
- Assetto Corsa
- Project Cars
- GTR 2
- Race 07
- rFactor
- Live for Speed
- ...and many others
- Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Please check the information on the product page of the Fanatec product through which they will be connected to the console. It will not work on consoles using the direct USB Connection or a ClubSport USB Adapter.
Special Notes
- Please note that the vibration function on gas and brake is not supported by all games. On PC it can be implemented with plug ins to our driver / third party software if the games sends the telemetry data.
-
Max resolution depending on the connection:
- through PWT / PWTS / CSR / CSR Elite wheel: 8 bit (256 values) on all axes
- through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E RW PS4: 12 bit (4096 values) on all axes
- USB direct connection (PC): 12 bit (4096 values) on all axes
Packaging Details
- Size (L x W x H) : 43.00cm x 28.00cm x 43.00cm
- Weight: 7.94kg
- Volume weight: 10.35kg
What's included
- ClubSport Pedals V3
- 3x Pedal Extensions
- 3x D-shape pedal plates
- 1x Strong spring throttle (black)
- 1x Strong spring clutch (black)
- 1x RJ12 connection cable (150cm)
- 1x USB connection cable (180cm)
- 1x Lithium grease bottle
- 1x Quick Guide
The servo wheel your skills deserve
This wheel base is as close to a real car as you can get.
Interchangeable steering wheels
Change the steering wheel in seconds with our proven automotive grade quick release system - even while in the game.
Upgradeable compatibility to Xbox One®
Attach optional steering wheels to make this wheel base compatible to Xbox One®. This wheel base is compatible with PC in combination with all available steering wheels.
Precision everywhere
The ClubSport Wheel Base V2.5 is a masterpiece of Germaneering® and sets new standards for performance and reliability.
DirectSensor™ technology
Double hall sensors on both motor and directly on the steering axis with unmatched precision and reliability.
Belt drive
The robust belt drive utilizes dual belts with multiple v-ribs and big ball bearings. This means no drag and no belt slippage It feels almost like a direct drive wheel.
A facelift for our proven technology
The ClubSport Wheel Base V2.5 is a careful and precise evolution of the highly successful V2. It comes with more advanced electronics and a new motor for improved feeling, functionality and even higher durability.
Brushless servo motor
The powerful brushless servo motor is incredibly smooth and delivers instant acceleration. It achieves this with no dead spots around the center.
Heavy duty materials
The ClubSport Wheel Base V2.5 is made of CNC machined aluminum parts in a stunning anodized finish.
Features
- Choose from a growing selection of very realistic steering wheels in many different styles
- Quick release system allows the easy change of steering wheels within seconds, even during gameplay
- Wheel base made of CNC machined aluminum parts with anodized finish
- Rock solid: Product weight is 4200 g, product dimensions (l x w x h) 210 mm x 295 mm x 150 mm
- DirectSensor™ technology: The sensor is mounted directly on the steering axis to avoid interference and performance issues that are inherent in belt and gear drives that have motor mounted sensor systems
- DUAL HALL technology: One Sensor is mounted on the motor and a second one on the axis. It does not get more precise than this.
- Ultra strong brushless servo motor
- Support for vibration motors in the steering wheel (depending on the steering wheel model)
- Cooling system with two big fans (left and back sides) and a huge heat sink on the motor
- Belt drive mechanism that's made completely of metal and uses high quality ball bearings and European belts to deliver the smoothest, most precise force feedback possible.
- High belt tension to avoid any slippage and durable ball bearings to minimize the drag
- Mount for ClubSport Static Shifter Paddles and other optional accessories
- Firmware can be updated with new features
- Motor driver firmware can also be updated
- 900° of rotation which can be reduced in the tuning menu of the attached ClubSport Steering Wheel
- Fast 1000 Hz USB update rate
- Allows connection for two external shifters (e.g. H-pattern and sequential) in parallel
-
Tuning functions* with LED display of the steering wheel to adjust settings independent from the game and during gameplay
- Saves up to 5 wheel set-ups
- Adjust sensitivity independent from the game. Turning angle can be adjusted in the wheel from 90° to 900°
- Adjust force feedback strength during game play
- Adjustment for vibration intensity in the steering wheel (depending on the steering wheel model). The vibration motors can be used by a game directly or by the ABS function
- Simulate ABS vibration in the steering wheel (depending on the steering wheel model) and on pedals with rumble motor like the ClubSport Pedals V3 by setting a starting point at % of brake input
- Advanced Drift Mode can now add a natural damper to avoid oscillation or a negative damper which will speed up the wheel.
- Customize the force feedback sensations by changing the spring, force effects and dampening forces
- Adjust the brake force sensitivity of compatible loadcell pedals like the ClubSport Pedals V3 or the CSL Elite Pedals LC
- * Tuning functions are subject to change.
Compatibility
Peripherals:
- All Fanatec ClubSport Steering Wheels
- All Fanatec CSL Steering Wheels
- All Fanatec Pedals
- All Fanatec Shifters
- All Fanatec Cockpits and Wheel Stands. The drilling pattern is compatible to the Porsche 911 or CSR wheels
Platforms:
- PC: This wheel base is compatible with PC in combination with all available steering wheels.
- Xbox One®: The compatibility can be upgraded with (optional) steering wheels like the ClubSport Steering Wheel Universal Hub for Xbox One or the Steering Wheel CSL P1 for Xbox One. Without any Xbox One® licensed steering wheel attached, the wheel base is NOT compatible to Xbox One®.
- PlayStation®: This product is not compatible to any PlayStation® console and cannot be upgraded to achieve compatibility.
Special Notes
- This is only the base unit. In order to drive you need several other items. Please use the product configurator to configure your system
- No steering wheel included. You need a ClubSport / CSL Steering Wheel to operate this product
- No pedals included
- No table clamp included. You need to mount it with screws to a cockpit or buy the optional ClubSport Table Clamp
- Hard-mount screws only included for the 3 hole pattern, pre-mounted with the 20° angle adapter. Please read the manual for information about qualified screws.
Packaging Details
- Size (L x W x H) : 46.00cm x 28.00cm x 29.00cm
- Weight: 8.30kg
- Volume weight: 6.94kg
What's included
- ClubSport Wheel Base V2.5
- Quick guide
- Power supply (~3+1.5 m/9.8+4.9 ft.)
- USB cable (~2 m/6 ft.)
- 2x RJ12 (male) - PS/2 (female) adapter cable (~50cm/1.6 ft.)
- 20° mounting adapter incl. screws (premounted)
Full replica
This is an exact reproduction of the steering wheel used in McLaren GT3 race cars. All switches, paddles, dials, shape and size are designed from the original McLaren CAD files.
Analog clutch paddles + Shifter paddles
The world premier of Fanatec dual-clutch system with analog clutch paddles and rocker type shifter paddles with snapdome fuction made of anodised aluminum.
OLED display
The 4th rotary encoder of the GT3 is replaced by a 1" OLED display with evolved Fanatec tuning menu functionality
F1 style dual-clutch system
Standing start? No problem. Use the new dual-clutch system as the ultimate weapon to nail every start of the race.
The Dual-clutch system's bite-point mode allows you to determine the optimal bite-point before the start of the race and utilize the perfect start every time
Analog handbrake on-board
Change to handbrake mode in order to use one paddle for clutch and one paddle to map with an analog handbrake axis.
Swap the mode on the fly
Bite-point mode, Handbrake mode, gas/brake mode and binary button mode - all available from the mode encoder in the center of the steering wheel
Racing ergonomics enhanced
Rocker switches,12 position rotary switches, laser engraved P & N (Pit & Neutral) buttons with high-bezel and Snapdome functionality, Fanatec FunkySwitch™ (7 functions) and 7 additional buttons with exchangeable button caps.
Exchangeable QR-system
Introducing new exchangeable Quick Release system. Upgrade the included simplified CSL Quick Release for the optional ClubSport Quick Release Adapter in no time.
The Allen key for the CSL QR is stored on the wheel.
Lightweight
This is the lightest Fanatec steering wheel with only 1045g. Less weight means better acceleration and better force feedback effects.
Features
- The exact replica of the McLaren GT3 Steering Wheel
- Officially licensed by McLaren Automotive Limited
- Officially licensed for Xbox One
-
Dual analog paddles with 4 modes and 4-way multiposition switch for changing the mode
- Clutch bite-point mode
- Clutch/handbrake mode
- Brake/throttle mode
- Mappable analog axis mode
- Solid anodised rocker type aluminum shifter paddles with snapdome functionality
- Diamond texture grips for shifter and clutch paddles
- 1" 128x64 OLED Display
- Upgraded Fanatec Tuning menu functionality
- Two Rocker switches
- Two 12-way multiposition switches
- Fanatec FunkySwitch™ (5-way digital joystick with rotary function)
- Two high-bezel snapdome buttons with laser engraved P & N indicators
- Seven Basic buttons with exchangeable button caps
- Tuning menu button
- Overmolded rubber grips (like original GT3 wheel) with 50 Shore A Hardness
- Glass-fiber reinforced and heat stabilized Simplified Quick Release and clutch paddles
- Exchangeable quick release. Can be upgraded to ClubSport Quick Release Adapter (optional)
- Allen key tool included in the steering wheel
- Exchangeable button caps included
- Button label placement indicators for placing additional indicators like "VIEW" & "KERS"
- Xbox One mode LED indicator
- Lightweight ( 1045 g / 2.30 lbs )
- Diameter ( 30 cm / 12 inch )
Compatibility
The mounted type of quick release adapter (standard or the optional ClubSport QR adapter) does not influence the compatibility to wheel bases.
Wheel Bases:
- ClubSport Wheel Base V2
- ClubSport Wheel Base V2.5
- CSL Elite Wheel Base
- CSL Elite Racing Wheel - officially licensed for PS4™
- CSL Elite Wheel Base + officially licensed for PS4
This steering wheel is not compatible with the ClubSport Wheel bases V1 and V1.5 for electronic reasons.
Platforms:
- Xbox One®: If connected with this steering wheel, the above mentioned wheel bases will be compatible to Xbox One.
- PC and other Platforms: The specifications of the compatible wheel bases will remain unchanged.
Special Notes
In order to operate this product, a compatible Fanatec Wheel Base (not included) is mandatory!
Connect your Wheel Base to a PC and install the latest driver to update the wheel base firmware before you mount the CSL Elite Steering Wheel GT3.
Packaging Details
- Size (L x W x H) : 38.00cm x 36.00cm x 19.00cm
- Weight: 2.00kg
- Volume weight: 4.92kg
What's included
- CSL Elite Steering Wheel McLaren GT3
- Racing style button caps
- Exchangeable Simplified Quick Release
- Allen key 5mm
- Fixation screw M6 x 18mm (flat head) for Simplified Quick Release
- Quick Guide
Product information
OVERVIEW
ADVANCED COCKPIT
- NEW! S1 is designed to be used as flight simulator rig allowing to install Throttle and joystick (Thrustmaster HOTAS Ready, on both left and right sides) as well as pedals, speakers, buttkicker.
- NEW! Pedals with sliders for easy ajustements.
- Support PC, PS3, PS4, PS5, XBOX 360, XBOX One, XBOX Series X | S (check what's supported tab below).
- Applicable for users from 127cm (4’2″) up to 200cm+ (6’67″+).
- Seat carry weight up to 140kg (308 lbs).
- Seating position Rally/GT.
- Modular Frame (You can upgrade with accessories).
- Seat Sliders Included.
- Footprint dimensions: L x W x H 1500 x 630 x 1180 mm. (59” x 24.8” x 46.5”)
- All tools and screws to attach your wheel and pedals are provided.
- Warranty on all RSeat Manufactured components including chassis and seat.
- Packaging Box: L x W x H 125 x 65 x 55cm (49.2" x 25.6" x 21.6" ) Weight: 55kg (121lbs)
- 100% Made in EU: Engineered, Designed and Manufactured in Europe.
Chassis
Made of Laser cut carbon steel and CNC bended round tubes.
Comes in Black and Red matte powder coat paint.
- Frame step on the ground by 4 adjustable feet (37mm diameter each).
- Casters Ready (M8 Thread)
- Wheel console made of Mandrel Bend carbon steel tubes NPS 1-1/2 (Din 48.3mm)
- Total height (with the seat): 1180 mm (46.5”)
- Total width: 630 mm (24.8”)
- Length: 1500 mm. (59”)
- Pedals plate width 364 mm. (13.62”)
- Pedals plate adjust from full flat up to 30°
- Wheel mounting plate allow to adjust height of the wheel ±120 mm (4.72”)
- Slide pedals front-backwards with sliders (rails) ±200mm (7.87inch)
- Slide The seat front-backwards with sliders (rails) ±190mm (7.48inch)
- Net weight: 48 kg (105 lbs)
- Gross weight 55 kg (121 lbs) The S1 with the packaging.
- Ready for upgrades
Please confirm what you required and we would forward price details and related information.
Shipping and Personal Collection
All customers are welcome to collect in person by prior arrangement from Hampstead,
London. (Just off the A41, 2 miles from M1/A5/A41 BrentCross interchange).
Overseas shipping contact us first...
Purchasing Terms and Conditions
- All prospective customers are welcome to contact us to talk over the phone or to arrange to come and see us at our place of business in Hampstead.
| Terms and Conditions (Please read Before You Buy) if you can't agree on these terms please don't buy! |
|
| Important Notice! Considering purchasing this item with a stolen credit card, then think again! We have been caught out only the once and now take precautions that would most certainly involve legal action being taken should you be found guilty of fraud. Don't waste your time or our's. |