62468 Adapter Mow-N-Vac Kit Leaf Vacuum Bagger Universal Deck Boot Chute


  • This is a fairly universal deck chute adapter to be used with lawn & leaf vacuums. It mounts down by the side discharge on your deck to connect the leaf vacuum hose to your deck.
  • This chute is plastic, and requires modification to fit a specific tractor. You will need to cut out from the plastic (with a hacksaw or some other type of saw or knife) where the chute attaches to the deck to make it fit your mower. Also, this unit should work with 6" or 7" leaf vacuum hose, but again you may need to make a few more cuts!
  • This should fit many models and makes of lawn tractors. Basically, as long as the discharge on your mower is not wider/longer than the length/depth of this one, you should be able to cut this one to make it fit yours.
  • The mounting surface on this one is about 20.25" long by about 6.25" tall and you can cut back around 5" deep towards the center of the chute.Also included with this chute are several templates for some of the more common decks.Templates include some of the following decks, although individual decks may vary from the same manufacturer even if they are the same width:
  • For AYP/Craftsman/Sears/Husqvarna 42" Deck / 46" Deck / 46" Deck (2 Blade) / 48" Deck / 54" Deck；For Cub Cadet 42" Deck /46" Deck (For Deep Dish Deck) / 46" Deck (For 2000 & 3000 Series Tractors) / 48" Deck / 54" Deck (For 2000 & 3000 series tractors)；For John Deere 38" Deck / 42" Deck (For "L" series) / 48" Deck (For "L" Series) / 50" Deck；For MTD 38" Deck (Deep Dish Deck) / 42" Deck (Deep Dish Deck) / 46" Deck (Deep Dish Deck) / 54" Deck.