|
|
|
|
|
|
|
|
|
|
Application:
1964-1988 Chevy Chevelle, Malibu, Monte Carlo
1959-1987 Chevy El Camino
1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery
1963-1981 Chevy Corvette
1967-1981 Chevy Camaro
1968-1974 Chevy II, Nova
With Manual Transmissions & 168 tooth Flywheel
Will not work on 1962-1967 Chevy II & Chevy Nova models as the size of the transmission tunnel is too narrow.
Will not work on Monza or Vega as they both used a cable operated 10.5" clutch with the pivot on the other side. The clutch fork was also angled about 45 degrees not straight across.
Cast Aluminum Performance Bellhousing:
Replaces GM Part # 3899621
Cast Aluminum Housing
Works with GM transmissions with a 4.675" O.D. Bearing Retainer
Clears 168 tooth 14" Flywheels with factory 11" clutch discs
1/2"-13 tapped hole for z-bar manual clutch linkage, if needed.
Fits ALL Small Block & Big Block Chevrolet engines regardless of factory clutch size
Flywheel Inspection Cover:
Replaces GM Part # 3843943
Includes 1/4" bolts to install inspection shield
Clutch Fork with Ball Retaining Spring:
Replaces GM Part # 3892632
Throwout Bearing:
Replaces GM Part # 19245400
Designed to effectively reduce friction
Made of high quality materials for long service life
Clutch Fork Boot:
Replaces GM Part # 3993851
Standard Clutch Fork Pivot Ball:
Replaces GM Part # 3729000
Installs into bellhousing to support clutch fork
13/16"-16 Threads, 1 1/2" total length end to end
Includes:
Bellhousing
Flywheel Inspection Cover
Clutch Fork with Ball Retaining Spring
Throwout Bearing
Clutch Fork Boot
Standard Clutch Fork Pivot Ball
Some Necessary hardware
| Item Specifics | |
|---|---|
| Condition | New |
| Brand | muparkt |
| Manufacturer Part Number | CE2511508IEC |
| Type | Clutch Kit |
| OE/OEM Part Number | 3899621, 3843943, 19245400, 3993851, 3729000 |
| Interchange Part Number | 3899621, 3843943, 19245400, 3993851, 3729000 |
| Fitment Type | Direct Replacement |
| Application 1 | 1964-1988 Chevy Chevelle, Malibu, Monte Carlo |
| Application 2 | 1959-1987 Chevy El Camino |
| Application 3 | 1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne,Brookwood |
| Application 4 | 1963-1981 Chevy Corvette |
| Application 5 | 1967-1981 Chevy Camaro |
| Application 6 | 1968-1974 Chevy II, Nova |
| Important Notice | With Manual Transmissions & 168 tooth Flywheel |
| Manufacturer Warranty | 1 Year |
| Items Included | Mounting Hardware |
| Tranmission Type | Manual |
We will ship all orders asap via UPS/FedEx.( No service on Weekend and public holidays).
Delivery time within the U.S. is usually just 3 to 5 business days, however in rare cases it could take 5 to 7 business days.
Items must be in original package with all original contents. Any item with alterations made will make refund/exchange invalid.
We reserve the right to invalidate a return or exchange if item does not match guidelines set forth by our policies.
Your satisfaction is very important to us. Please contact us via the methods available within eBay regarding any problems before leaving negative feedback.
Shop Category Hot Item
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
For 621 SBC BBC GM 11" Manual Clutch Appllications Bellhousing 1959-1988 Chevy
Application: 1964-1988 Chevy Chevelle, Malibu, Monte Carlo 1959-1987 Chevy El Camino 1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery 1963-1981 Chevy Corvette 1967-1981 Chevy Camaro 1968-1974 Chevy II, Nova With Manual Transmissions & 168 tooth Flywheel Will not work on 1962-1967 Chevy II & Chevy Nova models as the size of the transmission tunnel is too narrow. Will not work on Monza or Vega as they both used a cable operated 10.5" clutch with the pivot on the other side. The clutch fork was also angled about 45 degrees not straight across.
Replaces GM Part # 3899621 Cast Aluminum Housing Works with GM transmissions with a 4.675" O.D. Bearing Retainer Clears 168 tooth 14" Flywheels with factory 11" clutch discs 1/2"-13 tapped hole for z-bar manual clutch linkage, if needed. Fits ALL Small Block & Big Block Chevrolet engines regardless of factory clutch size
Flywheel Inspection Cover: Replaces GM Part # 3843943 Includes 1/4" bolts to install inspection shield
Clutch Fork with Ball Retaining Spring: Replaces GM Part # 3892632
Throwout Bearing: Replaces GM Part # 19245400 Designed to effectively reduce friction Made of high quality materials for long service life
Clutch Fork Boot: Replaces GM Part # 3993851
Standard Clutch Fork Pivot Ball: Replaces GM Part # 3729000 Installs into bellhousing to support clutch fork 13/16"-16 Threads, 1 1/2" total length end to end
Includes: Bellhousing Flywheel Inspection Cover Clutch Fork with Ball Retaining Spring Throwout Bearing Clutch Fork Boot Standard Clutch Fork Pivot Ball Some Necessary hardware
All rights reserved. |
