Features:
【Multiple Operation Modes】This solar controller with 7 different operation modes for your different need, including charging, light control, time-delay control, general control, manual control, timing control, and factory test mode.
【Intelligent LCD Display】Equipped with a large LCD display, the controller presents real-time information on battery and solar panel status, mode control, load output status, and various parameters. Visual interface easy monitoring and management.
【Efficient MPPT Charging】The controller features an automatic Maximum Power Point Tracking (MPPT) charging mechanism, 30% higher than the traditional PWM solar charger, which significantly improves the conversion rate of the circuit.
【Wide Compatibility and conservation】Compatible with different battery and solar panel voltage configurations, supports 12V/24V/36V/48V systems.Solar charge controller compatible with seal, GEL, flooded, LifePO4 battery charging.
【Safe Voltage conservation】MPPT solar controller with battery over-voltage and over-current conservation, power failure conservation, overcharge conservation, deep discharge conservation, reverse connection conservation, and overheat temperature conservation.
【Dual USB Outputs】MPPT charge controller supports charging for various USB devices, such as phones, tablets, game consoles, headphones, cameras and other digital products.
Note:
1.Charge 12V battery with 15-23V solar panels, charge 24V battery with 30-46V solar panels, charge 36V battery with 45-66V solar panels, charge 48V battery with 60-90V solar panels.DO NOT USE 24V/36V/48V solar panels to charge a 12V battery, the pressure difference is too large may cause overheating and damage the controller.
2.Wiring instructions: the controller in order to be able to correctly identify the battery voltage, the first wiring to ensure that: 12V battery voltage is higher than 10V; 24V battery voltage is higher than 20V; 36V battery voltage is higher than 30V; 48V battery voltage is higher than 42V, the controller is wired to connect to the battery first, and then connected to the photovoltaic panels, and then connected to the DCload.
Specifications:
Color: Black
Material: ABS
Battery Voltage: 12V/24V/36V/48V
Charging Current: 100A
Max Solar Input(Voc): 15-23V(12V Battery) / 30-46V(24V Battery) / 45-66V(36V Battery) / 60-90V(48V Battery)
USB Port: DC5V/1.5A×2USB
Operating temperature: -15℃～50℃
Item Size: 195 * 172 * 68mm / 7.6 * 6.7 * 2.6in
Item Weight: 900g / 31.7oz
Package Size: 205 * 205 * 70mm / 8.0 * 8.0 * 2.7in
Package Weight: 1100g / 38.8oz
Packing List:
1 * Controller
1 * User Manual
Thank you for your patronage, please feel free to give us 5 points of evaluation, thank you.
【Multiple Operation Modes】This solar controller with 7 different operation modes for your different need, including charging, light control, time-delay control, general control, manual control, timing control, and factory test mode.
【Intelligent LCD Display】Equipped with a large LCD display, the controller presents real-time information on battery and solar panel status, mode control, load output status, and various parameters. Visual interface easy monitoring and management.
【Efficient MPPT Charging】The controller features an automatic Maximum Power Point Tracking (MPPT) charging mechanism, 30% higher than the traditional PWM solar charger, which significantly improves the conversion rate of the circuit.
【Wide Compatibility and conservation】Compatible with different battery and solar panel voltage configurations, supports 12V/24V/36V/48V systems.Solar charge controller compatible with seal, GEL, flooded, LifePO4 battery charging.
【Safe Voltage conservation】MPPT solar controller with battery over-voltage and over-current conservation, power failure conservation, overcharge conservation, deep discharge conservation, reverse connection conservation, and overheat temperature conservation.
【Dual USB Outputs】MPPT charge controller supports charging for various USB devices, such as phones, tablets, game consoles, headphones, cameras and other digital products.
Note:
1.Charge 12V battery with 15-23V solar panels, charge 24V battery with 30-46V solar panels, charge 36V battery with 45-66V solar panels, charge 48V battery with 60-90V solar panels.DO NOT USE 24V/36V/48V solar panels to charge a 12V battery, the pressure difference is too large may cause overheating and damage the controller.
2.Wiring instructions: the controller in order to be able to correctly identify the battery voltage, the first wiring to ensure that: 12V battery voltage is higher than 10V; 24V battery voltage is higher than 20V; 36V battery voltage is higher than 30V; 48V battery voltage is higher than 42V, the controller is wired to connect to the battery first, and then connected to the photovoltaic panels, and then connected to the DCload.
Specifications:
Color: Black
Material: ABS
Battery Voltage: 12V/24V/36V/48V
Charging Current: 100A
Max Solar Input(Voc): 15-23V(12V Battery) / 30-46V(24V Battery) / 45-66V(36V Battery) / 60-90V(48V Battery)
USB Port: DC5V/1.5A×2USB
Operating temperature: -15℃～50℃
Item Size: 195 * 172 * 68mm / 7.6 * 6.7 * 2.6in
Item Weight: 900g / 31.7oz
Package Size: 205 * 205 * 70mm / 8.0 * 8.0 * 2.7in
Package Weight: 1100g / 38.8oz
Packing List:
1 * Controller
1 * User Manual
Thank you for your patronage, please feel free to give us 5 points of evaluation, thank you.
