SKB Cases - 3R2216-15B-E - Valise Industrielle étanche

Ces mallettes ont été conçues pour répondre aux normes militaires les plus strictes.

Elles sont roto-moulées pour une solidité et une durabilité accrues et étanches avec des loquets et des charnières en acier inoxydable solides qui résisteront aux conditions d'expédition les plus difficiles.

Les malettes 3R aux normes militaires sont fabriquées en polyéthylène (LLDPE) moulé résistant aux chocs et stabilisé contre les rayons UV et satisfont ou dépassent les spécifications MIL-STD 810 et MIL-C-4150J.

Les mallettes de transport sont toutes disponibles avec un intérieur vide tandis que certains modèles sont disponibles avec :

• de la mousse alvéolée
• de la mousse stratifiée
• des cloisons matelassées
• une poignée de traction avec des roulettes

La plupart des modèles sans poignée de traction intégrée peuvent être équipées de roulettes vendues séparément.

Dimensions :

• Longueur intérieure : 55.88 cm  
• Largeur intérieure : 40.64 cm  
• Profondeur intérieure : 38.10 cm  
• Profondeur couvercle : 7.62 cm  
• Profondeur : 30.48 cm

SKB Cases - 3R2216-15B-E - Equipment Case waterproof

These Mil-Standard cases were designed to meet the most demanding military specifications, they are roto-molded for strength and durability, airtight and water proof with solid stainless steel latches and hinges that will withstand the most demanding shipping conditions. The 3R Mil-Std. Cases are molded of (LLDPE) polyethylene impact resistant / UV stabilized material and meet or exceed MIL-STD 810 and MIL-C-4150J specifications. The shipping cases are all available with an empty interior while some models are available with: cubed foam, layered foam, padded dividers, and a pull handle with wheels. Most models without a built-in pull handle or tow handle accommodate a field installable caster kit which is sold separately. (See the accessories tab below for the 3SKB-CAST1 caster kit.) Select models are available with TSA recognized and accepted locking latches in place of stainless steel padlockable latches.

• Waterproof and dust tight design (MIL-C-4150J)
• LLDPE Polyethylene impact resistant
• Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
• Pressure relief / breather valves
• Resistant to impact damage (MIL-STD-810F)

Dimensions :

• Interior Length : 22.00 in 55.88 cm  
• Interior Width : 16.00 in 40.64 cm  
• Interior Depth : 15.00 in 38.10 cm  
• Lid Depth : 3.00 in 7.62 cm  
• Base Depth : 12.00 in 30.48 cm

SKB Cases - 3R2216-15B-E - Equipment Case waterproof

These Mil-Standard cases were designed to meet the most demanding military specifications, they are roto-molded for strength and durability, airtight and water proof with solid stainless steel latches and hinges that will withstand the most demanding shipping conditions. The 3R Mil-Std. Cases are molded of (LLDPE) polyethylene impact resistant / UV stabilized material and meet or exceed MIL-STD 810 and MIL-C-4150J specifications. The shipping cases are all available with an empty interior while some models are available with: cubed foam, layered foam, padded dividers, and a pull handle with wheels. Most models without a built-in pull handle or tow handle accommodate a field installable caster kit which is sold separately. (See the accessories tab below for the 3SKB-CAST1 caster kit.) Select models are available with TSA recognized and accepted locking latches in place of stainless steel padlockable latches.

• Waterproof and dust tight design (MIL-C-4150J)
• LLDPE Polyethylene impact resistant
• Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
• Pressure relief / breather valves
• Resistant to impact damage (MIL-STD-810F)

Dimensions :

• Interior Length : 22.00 in 55.88 cm  
• Interior Width : 16.00 in 40.64 cm  
• Interior Depth : 15.00 in 38.10 cm  
• Lid Depth : 3.00 in 7.62 cm  
• Base Depth : 12.00 in 30.48 cm

SKB Cases - 3R2216-15B-E - Equipment Case waterproof

These Mil-Standard cases were designed to meet the most demanding military specifications, they are roto-molded for strength and durability, airtight and water proof with solid stainless steel latches and hinges that will withstand the most demanding shipping conditions. The 3R Mil-Std. Cases are molded of (LLDPE) polyethylene impact resistant / UV stabilized material and meet or exceed MIL-STD 810 and MIL-C-4150J specifications. The shipping cases are all available with an empty interior while some models are available with: cubed foam, layered foam, padded dividers, and a pull handle with wheels. Most models without a built-in pull handle or tow handle accommodate a field installable caster kit which is sold separately. (See the accessories tab below for the 3SKB-CAST1 caster kit.) Select models are available with TSA recognized and accepted locking latches in place of stainless steel padlockable latches.

• Waterproof and dust tight design (MIL-C-4150J)
• LLDPE Polyethylene impact resistant
• Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
• Pressure relief / breather valves
• Resistant to impact damage (MIL-STD-810F)

Dimensions :

• Interior Length : 22.00 in 55.88 cm  
• Interior Width : 16.00 in 40.64 cm  
• Interior Depth : 15.00 in 38.10 cm  
• Lid Depth : 3.00 in 7.62 cm  
• Base Depth : 12.00 in 30.48 cm

SKB Cases - 3R2216-15B-E - Equipment Case waterproof

These Mil-Standard cases were designed to meet the most demanding military specifications, they are roto-molded for strength and durability, airtight and water proof with solid stainless steel latches and hinges that will withstand the most demanding shipping conditions. The 3R Mil-Std. Cases are molded of (LLDPE) polyethylene impact resistant / UV stabilized material and meet or exceed MIL-STD 810 and MIL-C-4150J specifications. The shipping cases are all available with an empty interior while some models are available with: cubed foam, layered foam, padded dividers, and a pull handle with wheels. Most models without a built-in pull handle or tow handle accommodate a field installable caster kit which is sold separately. (See the accessories tab below for the 3SKB-CAST1 caster kit.) Select models are available with TSA recognized and accepted locking latches in place of stainless steel padlockable latches.

• Waterproof and dust tight design (MIL-C-4150J)
• LLDPE Polyethylene impact resistant
• Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
• Pressure relief / breather valves
• Resistant to impact damage (MIL-STD-810F)

Dimensions :

• Interior Length : 22.00 in 55.88 cm  
• Interior Width : 16.00 in 40.64 cm  
• Interior Depth : 15.00 in 38.10 cm  
• Lid Depth : 3.00 in 7.62 cm  
• Base Depth : 12.00 in 30.48 cm