Grenade shaped Incense Cone Holder
Place
and burn the incense cone in FEACE-1, and then
the oxygen comes in through six holes in the center of its body. With the cone
burning, smoke comes out from the holes 7mm in diameter on top and fills your
room with fragrance. Unlike other open-top type stands, there's little external
influence and it lasts about 30 minutes.
Made
of heat-resistant plastic, it doesn't get deformed even under the highest
temperature while burning. The cone and other parts are made of stainless steel
for safety.
We
applied a burner 19mm in diameter so that you
can use various incense cones of different sizes. It can be used for the
purpose of either enhancing the scent of the room or decorating your house.
Especially when outside, you can use bug-repellent incense cones to better
enjoy your outdoor activities.
Unlike
an open-top holder, there's no ash flicking by wind so that you can keep the
surrounding clean while using it. It's easy to handle after burning finishes
and safe from fire even when it falls. But if that happens, you should remove
the cone immediately to prevent it from distortion.
When
you open the bottom cap, there you can store the spare incense cones as well.
It helps put more weight to the bottom and thus makes it safer to use.
How to use
Place
the product on the smooth surface and unscrew the cap of it.
Place the cone in the holder and light the tip of it. (a lighter or a torch are
recommended)
Once
lit, blow the flame out and recap the holder.
If
you place the holder on the inclined or uneven surface for a long time, the
cone can get close to the inside of the holder and cause its shape distortion.
You should take the flame away before you screw the cap to prevent a fire
hazard.
After
the cone finishes burning (about 30 minutes), wait until it's completely put
out.
When
it cools down (about 1 hour), dispose of burnt incense cone ash. (be careful of
burns)
The
smell of incense cones is more intense compared to that of sticks. Please use
it outside or keep the room well ventilated when burning it inside.
Do
not move the holder when burning incense. If you should, however, then please
hold the bottom of the holder and make sure that the cone inside won't fall.
The bottom 2~3mm of the cone normally doesn't completely burn. Thus, please do
not touch remnants of the incense right after it has finished burning, and
always be careful with burns. You should wait until the cone burns out on its
own before you clean it.
Caution
Do not leave the incense
unattended.
Do not put it on an uneven
surface.
Do not throw it.
Place it out of reach of
children.
This
product is not for kids. Keep out of reach of children.
Cleaning Instruction
The
ashes can be easily removed when you put the product upside down and dust them
off. Then you can use a brush to wipe off the remaining ashes that fall into
the wall inside. The holder is made of plastic and stainless steel, so it can
be rinsed with water. You can use soap and brush to clean the product. Please make
sure it is completely dry and store it away from direct sunlight.