Saginaw Power Steering Pump P Series 5/8 Keyway Pulley Shaft Chrome For GM Chevy
Item Description:
- 100% quality assurance tested, more responsive, less expensive, easier to install.
- Desirable early style "Type 1" pump with threaded and keyed shaft for easy pulley installation.
- Pump Pressure is 1200-1450 PSI with a 1.3-3.2 GPM Flow Rate.
- Have a 0.3" hose barb for the return line, a female M16*1.5 inverted flare fitting and 3/8 " mounting holes.
- Precise and smooth steering, get maximum out of your steering system.
Installation Instructions:
- Begin by removing the power steering belt and disconnecting the pressure and return hoses from the pump. The fluid will drain out of the pump and lines, so have a waste oil container available.
- emove all bolts that retain the pump and its mount brackets to the engine. Remove the pump assembly from the vehicle.
- Using a power steering pump pulley remover, remove the pulley from the pump. Remove the mounting bracket from the pump.
- Install the pump mount bracket onto the new pump. Install the pump pulley onto the pump.
- Attach the arm by removing the lower bolt and install the arm. Add washers as needed to keep the arms straight with the pump face.
- Tighten up all bolts and install the belt. Adjust for tension. Check that all bolts are tight and the pump is properly aligned.
- Line from hose barb to low-pressure port, then line from SAE inverted flare to high pressure.
- Add fluid into the inlet port, then start the vehicle, test the steering power.
Fitment:
- Fit most GM 66-74 Saginaw 5/8" Keyed Shaft Style.
- For 70-74 Chevrolet Monte Carlo V8 5.7L / 6.6L / 7.4L.
- For 74 Chevrolet Camaro V8 5.7L.
- For 73 Chevrolet Camaro V8 5.0L / 5.7L.
- For 70-72 Chevrolet Camaro V8 5.0L / 5.7L / 6.6L.
- For 70 Chevrolet El Camino V8 6.5L.
- For 70-73 Chevrolet El Camino V8 5.0L.
- For 70-74 Chevrolet El Camino V8 5.7L / 6.6L / 7.4L.
- For 74 Chevrolet Malibu V8 5.0L.
- For 73-74 Chevrolet Malibu V8 5.7L / 6.6L / 7.4L.
- For 70 Chevrolet Chevelle V8 6.5L.
- For 70-73 Chevrolet Chevelle V8 5.0L / 5.7L / 6.6L / 7.4L.
- For 66-68, 70-72 Chevrolet Bel Air.
- For 66-68, 70-72 Chevrolet Biscayne.
- For 70-72 Chevrolet Brookwood.
- For 67-69 Chevrolet Camaro.
- For 66-72 Chevrolet Caprice.
- For 66-68 Chevrolet Chevelle.
- For 66-67 Chevrolet El Camino.
- For 66-72 Chevrolet Impala.
- For 69-71 Chevrolet Kingswood.
- For 69-74 Chevrolet Nova.
- For 69-71 Chevrolet Townsman.
- For 73-74 Chevrolet Vega.
Vehicle compatibility charts are for REFERENCE ONLY. Check product type and size to match your needs.
Material & Color:
- Material: made of QT500 and Iron, Chrome plated.
- Color: As Picture.
Package Included:
- 1x Power Steering Pump.(100% Brand New Never Used Or Installed)
Note:
- Provide Tracking Number With Every Order, Please Buy With Confidence!
- No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.
- Will come with everything you see in the picture. Please allow difference due to manual measurement.
- Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
- For any inquiries or special requests such as larger amount ordering please write to us.
