1. You can iron horizontally, but only when the water level is above half, otherwise the product may not pump/work properly
2. It needs to be fully warmed up before use.
3. The water volume of the water tank should not exceed nor be lower than the normal water level.
4. The outlet pipe of this product is relatively thin, so you must use cold pure water, otherwise impurities will block the outlet pipe. If the outlet pipe is blocked, please clean it as follows.
5. There are 2 buttons to control the steam. The power button is for power connection only. Use the steam lock to generate continuous steam.
1. When not in use, press the power switch or unplug the power cord.
2. Remove the water tank and empty the remaining water in the water tank.
3. Place upright on a flat table and wait for the product to cool.
1. Descaling treatment twice a year: put 1 part of vinegar and 2 times the water of vinegar in the water tank, turn on the steam switch and let it work for 5 minutes, then turn off and empty the water tank. The product can be reused after 10 hours.
2. Remove the steam brush from the steam head and clean with a damp cloth.
3. Please do not use harsh or abrasive cleaners or solvents.
4. Always ensure that the steam outlet holes are clean, free of scale, and not blocked.
1. It is recommended to store the steamer vertically in a flat location, such as in a cabinet.
2. Do not immerse the garment steamer in water or other liquids.
3. Do not drop, throw or try to bend it.
4. Please do not try to disassemble and disassemble the electrical appliance.
5. Avoid storing electrical appliances in damp places
6. Do not get close to the heat source or let the sun shine directly on the appliance.