Features:

Head Combs is a safe and easy way to replace the heads on your hard drive. These tools ensure a non-contact head replacement. Non-contact head replacement means that there is no contact between the heads or between the head and the disc during the removal of the donor head and the mounting of the head on the patient driver.

The conventional technique of replacing the magnetic head means the contact between the magnetic head itself and the contact of the magnetic head with the magnetic disk in the data area. These problems are particularly exposed to drives that suffer from some physical damage (head impact).

The head can be transferred from the donor to the patient's hard drive in a few simple steps. During head replacement, the heads do not touch each other or come into contact with the disc. Each changer tool is designed for a specific brand and model of hard drive because the mechanical structure of the different hard drives does not match.

This head replacement tool (Head Combs) can be used to replace the heads of almost all 2.5-inch and 3.5-inch (for ST/Samsung/HGST/Fujitsu/Toshiba) hard drives whose heads are parked on ramps. These head replacement tools are used to ensure that the heads do not touch each other during the replacement process and that they are easy to install back to the ramp.

These tools do not address head compatibility issues. They will only ensure that the heads are easily replaced on supported drives.

Specification:

List of Head Replacement Tools families and models :

For Seagate Hard Drive Head Combs:

ST 2-5: for Seagate 4TB laptop HDD head comb, ST4000LM016, 5 platters, 10 heads

ST2-4: for Seagate 2.5inch HDDS, 4 platters

ST2-2: for Seagate 2.5inch HDDS, 2 platters

ST2-1: for Seagate 2.5inch HDDS, 1 platters

ST332: for Seagate 3.5inch HDDS, 2 platters

ST334: for Seagate 3.5inch HDDS, 4 platters

ST313: for Seagate 3.5inch HDDS, 3 platters, type 1

ST323: for Seagate 3.5inch HDDS, 3 platters, type 2

ST ES3-5: for Seagate enterprise 3.5inch hard drives, 1-5 platters supported and the ES.3 1-3T hard drives are tested.

ST3 6: for Seagate 3.5inch 8TB hard drives with 6 platters and 12 heads

For Seagate SAS 2.5 Drives

SST 2 1: SAS 2.5inchHDDS, 1 platter

SST 2 2: SAS 2.5inchHDDS, 2 platters

SST 2 3: SAS 2.5inchHDDS, 3 platters

For Hitachi(HGST) Hard Drive Head Combs:

H3-1 3: 3.5inch for Hitachi HDDS, 3 platters

H3 5: 3.5inch for Hitachi HDDS, 5 platters

H3-1 2: 3.5inch for Hitachi HDDS, 2 platters

H2 2: 2.5inch for Hitachi HDDS, 2 platters

H2 1: 2.5inch for Hitachi HDDS, 1 platter

HUS2 2: 2.5inch for Hitachi SAS HDDS, 2 platters.

Package List:

Repair kit * 1

Finger sleeve * 10

Gloves * 1 pair