30A Solar panels Battery Charge Controller
Product Description:
With light sensor,it could work for solar light system.
Only For off-Grid PV Solar System.
For 10A 12V Pv System:120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 10A 24V Pv System:240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
Product Features:
Rated Voltage:12V 24V Auto
Application:Solar System Controller
Current:30A
Build-in industrial micro controller.
Graphical digital LCD display.
Fully 3-stage PWM charge management.
Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections.
With battery temperature compensation.
System Connection:
Connect the battery to the charge regulator - plus and minus
Connect the solar panel to the regulator - plus and minus
Connect the consumer to the charge regulator - plus and minus
Safety Instructions:
Make sure your battery has enough voltage for the controller to recognize the battery type before first installation
The battery cable should be as short as possible to minimize loss
The regulator is only suitable for lead acid batteries:OPEN,AGM,GEL
it is not suited for nickel metal hydride other batteries
The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator
Kindly Note:
The same order applies when uninstalling
An improper sequence order can damage the controller
Pacakge Includes:
1 x Solar panels Battery Charge Controller
2 x Wires
1 x User Manual
10 pairs of Solar Panel Cable Connector
Specification:
Rate voltage :1000V
Rated current :30A(4mm2,6mm2)
Test voltage :6KV(50Hz)
Protect degree: IP67
Insulation material :PPO
Contact material Copper :sliver plated
Operating temperature :-40°C~+90°C
Safe class :2
Flame class: UL94-V0
Contact resistance of plug connectors: ≤5mΩ
Insertion force :≤50N
Withdraw force: ≥50N
Suitable cable :2.5mm2/4mm2/6mm2(AWG14/12/10)
Locking system Snap in Drawing
Package Includes:
10 pairs of Solar Panel Cable Connector
