Model:
A: (5μm, 10μm, 15μm, 20μm)
B: (10 μm, 15 μm, 20 μm, 25 μm)
C: (25 μm, 50 μm, 75 μm, 100 μm)
D: (50 μm, 100 μm, 150 μm, 200 μm)
E: (30 μm, 60 μm, 90 μm, 120 μm)
F: (100 μm, 200 μm, 300 μm, 400 μm)
G: (50 μm, 75 μm, 100 μm, 150 μm)
H: (100 μm, 150 μm, 200 μm, 250 μm)
K: (250 μm, 500 μm, 750 μm, 1000 μm)
L: (300 μm, 400 μm, 600 μm, 1000 μm)
Technical Parameters:
Material: Stainless steel
Effective coating width: 80MM
Total length: 100MM
Application: Used for coating wet film with specified thickness to determine the covering rate, color or sample of sample.
Hardness: HRC55 ± 2
Specifications/Precision:
5±1 ,10±2, 15±2, 20±2
10±2, 15±2, 20±2 ,25±2
25±2, 50±2, 75±2, 100±2
50±2 ,75±3, 100±3, 150±3
100±3, 150±3, 200±3, 250±3
250±3, 500±5, 750±5, 1000±10
Instructions:
Place the template on the platform and secure it, and do not move it when the prep is passed. Select the preparation device according to the required wet film thickness, place it on the short side of the template, close to the parallel or specified position, and then about 5 ml of the sample on the island in front of the preparation device, press the ends with your fingers to 150 Slip at a speed of millimeters per second, that is, apply a wet film of desired thickness. After use, wash with solvent and dry, oil the surface.
|