Hanging mill, gong matching machine, flat knitting machine

Scope of application: It can be installed on electric grinders, engraving machines, and pneumatic engraving pens. The diamond grinding head is made of electroplated multi-water chestnut diamond, mainly used for grinding, mold processing and repair, stone carving, engraving, cutting lines, grinding, hollowing out, jade carving, glass carving, cleaning casting, forging, The burrs, burrs, and welds of weldments. Gear grinding. Chamfering and groove processing of various mechanical parts. Cleaning pipes, finishing inner holes and surfaces of mechanical parts.

Tips: When using diamond tools, please pay attention to the following:

1. When you install a new tool, be sure to test whether the tool jumps. If it jumps, you can't work directly. You have to adjust it so that it doesn't jump before you can use it. Otherwise, the tools will wear out quickly, and the carved things will not be very smooth. Adjustment method: Use a small wrench for changing the chuck to lightly tap the high-speed rotating tool handle until the tool is stable. It is strictly forbidden to knock on the electronic machine. The adjustment method is to loosen the chuck, turn the tool at an angle or extend and retract a little.

2. It must be cooled with water (similar to dripping devices like hospital drips), such as dry drills, the diamond on the tool head will be graphitized due to overheating, and will be quickly worn out and scrapped.

3. When drilling, try to avoid shaking, because shaking will cause local damage to the tool and accelerate the damage of the entire tool.

4. The speed should be as high as possible. Generally, the line speed is not lower than 10-20 meters per second.

5. Feed with light pressure. Diamond tools rely on grinding to process workpieces. If excessive force is used, the grinding powder is not easy to remove, and the tools are easily damaged.