Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW), lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting.

The function on the equipment is disabled by default, and the user needs to activate the function with an activation card before using it. And this function needs to be matched with THINKCAR ADAS calibration tools. Mainly used to calibrate various camera and radar of driver assistance systems.

has 41+ service functions that allow you to reset various systems in your vehicle. Supports more features than other similarly priced scanners:

1.Oil Reset

Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.

2.DPF Regeneration

It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.

3.Throttle Adaption

To utilize the car decoder to initialize the throttle actuator so that

the learning value of the ECU returns to the initial state.

4.Brake-pad Reset

To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.

5.SAS Reset

It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.

6.Battery Matching

Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.

7.ABS Bleeding

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

8.Gear Learning

Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

9.IMMO Service

To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

10.Injector Coding

After the ECU or injector is replaced, injector code of each cylinder must be

confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.

11.TPMS Reset

When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and tire pressure sensor is damaged,The tire pressure

resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.

12.Suspension Matching

When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.

13.AFS Reset

It is used to initialize the adaptive headlamp system.

14.Gearbox Matching

This function can complete the gearbox self learning to improve gear shifting quality

15.Sunroof Initialization

This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.

17.ODO Reset

ODO reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.

18.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

19.Transport Mode

In order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

20.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

21.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided that the vehicle has a hidden function and supported by hardware).

22.NOx Sensor Reset

If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

23.AdBlue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

24.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired

25.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

26.Tyre Reset

This function is used to set the size parameters of the modified or replaced tire.

27.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory.

Note: Not universal for all vehicles. Available maintenance functions vary depending on the make, year, and model.

 AUTO VIN

Auto VIN can easy and fast detect the VIN number on cars.

12 Data Graphs shows in the same screen

Support a maximum of 12 live data to be merged into a graphic for data comparison, which can be as diagnostic data Records, and Playback, to better monitor vehicle performance and analyze abnormal parameters. And has the Screen Recorded Function, which can record during the use of the KINGBOLEN K10 code reader to record the diagnosis results at any time.

KINGBOLEN K10 Language

English, German, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkic, Dutch, Hungarian, Traditional Chinese, Korean, Greek, Slovak, Romanian, Arabic, Croatian, , Slovenian, Finnish, Czech, Vietnamese, Swedish, Serbian, Persian

VAG guide

It supports the Guided Function for VW/AUDI/BMW, offering on-screen instructions to guide you to operate the maintenance functions step-by-step through the complexities of the situation.

Supports Remote Assistance & Feedback:

Supports Remote Assistance, if you have any vehicle issue that you can’t figure out, you can request remote assistance through third-party software. Sending your device ID number to the device, so as to guide you to the problems encountered in the process of using the device, can assist you to diagnose an abnormal vehicle wherever you are by Remote Diagnose. And if you encounter any model software problems and functional errors met during use, please submit the Feedback immediately for issue analysis, and then The KINGBOLEN mechanics will help you to solve the problems.

AutoAuth Access：

It supports AutoAuth for FCA SGW, which makes it compatible with Chrysler, Dodge, Jeep, Alfa Romeo, and Fiat vehicles manufactured after 2019.(*Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.)

Supports Car List :

For ASTONMARTIN, For AUDI, For AUSTFORD, For AUSTHOLDEN, For AUTOSEARCH, For BAIC, For BENZ, For BMW, For BXFIAT, For BXGM, For CHANGAN, For CHANGCHENG, For CHANGHE, For CHRYSLER, For CITROEN, For CMC, For DAEWOO, For DAIHATSU, For DEMO, For DFXK, For DR ECUAID, For EOBD2, For FERRARI, For FIAT, For FLYER, For FUTIAN, For GAZ, For GM, For HAFEI, For HMAZDA, For HONDA, For HUACHEN, For HYUNDAI, For IKCO, For INDIAN MAHINDRA, For INDIAN MARUTI, For INDIAN TATA, For ISUZU, For IVECO, For IZH, For JACTY,For JIAO, For JINLONG, For JOYLONG, For JPISUZU, For KIA, For LANDROVER, For LIFAN, For LIUWEI_TY, For LUXGEN, For MAHINDRA, For MALAYSIA PERODUA, For MALAYSIA PROTON, For MARUTI, For MASERATI, For MAXUS, For MAZDA, For MITSUBISHI, For MVM, For NISSAN, For OPEL, For PAZ, For PERODUA, For PEUGEOT, For PORSCHE, For PROTON, For QIRUI_TY, For QOROS, For RENAULT, For RESETADBLUE, For RESETAFS, For RESETAIRBAG, For RESETAIRFUEL, For RESETBLEED, For RESETBMS, For RESETBOX , For RESETBRAKE, For RESETCOOLANT, For RESETDPF, For RESETEGR, For RESETETS, For RESETGEAR, For RESETIMMO, For RESETINJEC, For RESETLANGUAGE, For RESETNOXSENSOR, For RESETODO, For RESETOIL, For RESETSAS, For RESETSEAT, For RESETSTOPSTART, For RESETSUN, For RESETSUS, For RESETTPMS, For RESETTRANSPORT, For RESETTYRE, For RESETWINDOW, For ROVER, For SAAB, For SAICMG, For SAIPA, For SAMSUNG, For SEAT, For SEAZ, For SGM, For SKODA, For SMART, For SPARK_TY, For SPRINTER, For SSANGYONG, For SUBARU, For SUZUKI, For TATA, For TOYOTA, For TPMS, For TRUMPCHI, For UAZ, For USAFORD, For VAZ, For VOLVO, For VW, For WEILI, For XIALI, For XINKAI, For ZAZ, For ZHONGSHUN, For ZHONGTAI, For ZHONGXING

More models are being upgraded.....

How to Register it ?

Step 1: Setting language and Time Zone, Connect to WIFI.
Step 2: Agree to the registration terms.
Step 3: Sign up for an account with your email
Step 4: VCI Activate - Enter Serial Number and Password to Activate

 

Technical Detailed：

KINGBOLEN K10 Package list:

1.Main Unit:

KINGBOLEN K10

VCI Diagnostic Connector

2.Connector:

1x TOYOTA-17 Diagnostic Connector

1x BENZ-38 Diagnostic Connecting Line

1x BMW-20 Diagnostic Connecting Line

1x TOYOTA-22 Diagnostic Connector

1x HONDA-3 Diagnostic Connector

1x GM/VAZ-12 Diagnostic Connector

1x CHRYSLER-6 Diagnostic Connector

1x MITSUBIHI/HYUNDAI-12+16 Diagnostic Connector

1x FIAT-3 Diagnostic Connector

1x NISSAN-14+16 Diagnostic Connector

3.Accessories：
OBD I Adaptor

Diagnostic Extension Cable

Clipper Cable(LCDSS)

Cigarette Lighter Cord
User Mannual  

3-in-1 Charger(Matched With U.S.,U.K,and EU Plugs)

Charging Cable

Fuse(AC250V/5A, φ6*30mm)

Fuse(AC250V/5A, φ5*20mm)

1x gift(el-50448)