For Chevrolet Malibu Cobalt Saturn Aura Pontiac A/C Compressor CO 20741C 67275
Please clean The cooling system pipe of the your car ,Before installing the compressor

This is a list for a brand new replacement A/C Compressor and Clutch


 
 
Feature:

*Condition: 100% Brand New and High Quality.
*According to the original factory specifications.
*Perfect match for the original car.
*Stable characteristics, high reliability.
 
 
Package Content

1 x A/C Compressor
 

Fitment:
 
 
    2002-2005 Chevrolet Cavalier 2.2L (16 Valve;w/ CVC A/C Compressor;)
    2008-2010 Chevrolet Cobalt 2.0L (1st Design;)
    2005-2007 Chevrolet Cobalt 2.2L (1st Design;)
    2006-2007 Chevrolet Cobalt 2.4L (1st Design;)
    2008-2010 Chevrolet HHR 2.0L
    2006-2007 Chevrolet HHR 2.2L (1st Design;)
    2006-2007 Chevrolet HHR 2.4L (1st Design;)
    2007-2008 Chevrolet Malibu 2.2L
    2008-2012 Chevrolet Malibu 2.4L
    2007-2007 Pontiac G5 2.2L (1st Design;)
    2007-2007 Pontiac G5 2.4L (1st Design;)
    2007-2010 Pontiac G6 2.4L
    2005-2006 Pontiac Pursuit 2.2L
    2006-2006 Pontiac Pursuit 2.4L
    2002-2005 Pontiac Sunfire 2.2L
    2002-2002 Pontiac Sunfire 2.4L
    2008-2009 Saturn Aura 2.4L
    2003-2005 Saturn Ion 2.2L
 
 
OEM and Competitor Interchange:
 

    AC Delco: 1520741
    AC Delco: 1521198
    AC Delco: 1521521
    AC Delco: 1521583
    AC Delco: 1521588
    AC Delco: 1522261
    Austin Baker: 10344861
    Austin Baker: 10349111
    Autocomp Technologies: 1020741
    Autocomp Technologies: 1120741
    Autocomp Technologies: 1220741
    Compressor Works: 621198
    Compressor Works: 621583
    Delphi Automotive Systems: CS10046
    Delphi Automotive Systems: CS10077
    Delphi Automotive Systems: CS20028
    Delphi Automotive Systems: CS20063
    Four Seasons: 67275
    Four Seasons: 68275
    Frigette: 2041521
    General Motors: 15231223
    General Motors: 15893103
    Global Parts Distributors: 6511420
    Global Parts Distributors: 7511420
    NAPA: 254492
    NAPA: 255665
    NAPA: TEM254492
    NAPA: TEM255665
    Omega: 2020741
    Omega: 2020741AM
    Omega: 2020741C
    Omega: 2020756
    Omega: 2020756R
    Ranshu: 1420741
    Ranshu: 1420741NC
    Ranshu: 1420741RC
    Ranshu: 1421583NC
    Ranshu: 1421583RC
    Ranshu: 1421588
    Ranshu: 1421588C
    Ranshu: 1421588NC
    Ranshu: 1421588NEW
    Ready-Aire/Proliance: 2704N
    TRAD AUTOMOTIVE: C1787R
    TRAD AUTOMOTIVE: C2453
    TRAD AUTOMOTIVE: C460R
    Valeo: 700726

 
 
 
COMPRESSOR INSTALLATION INSTRUCTIONS


Please read these instructions prior to any repairs on your vehicle.


Follow all federal, state, and local regulations when repairing an automotive A/C system.


Take appropriate safety precautions –

1. Wear eye protection (safety glasses). 

2. Do not smoke next to the vehicle when performing repairs.

3. Work in a well-ventilated area.

4. Wear skin protection (such as gloves and closed toe shoes).

5. Recover refrigerant before making repairs.



REMOVING THE OLD COMPRESSOR


1. Open the hood of the vehicle and locate the A/C Compressor.

2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped).

3. Evacuate the A/C system using a refrigerant recovery machine.

4. Disconnect the negative battery cable.

5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned.

6. Disconnect any electrical connectors from the A/C Compressor.

7. Remove the AC Connections. Remove the A/C Compressor mounting bolts.

8. Remove the A/C Compressor from the vehicle.

​​​​​​​



INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR


1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle. ​​​​​​​

2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.

    Flush evaporators from inlet to outlet.
    Flush condensers from outlet to inlet.


NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced.


3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 

4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.

5. Next, install the new or remanufactured A/C Compressor.

6. Install and tighten the A/C Compressor mounting bolts.

7. Reconnect any electrical connectors to the A/C Compressor.

8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.

9. Reconnect the negative battery cable.

10. Evacuate the A/C system with an A/C servicing machine for at least one hour.

11. Check the system for leaks.

12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system. ​​​​​​

13. Start the vehicle’s engine and turn on the A/C system.

    Make sure the windows and doors of the vehicle are open.



Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.

 
 
Frequently Asked Questions
 
 

Q. Does the compressor come with oil?

A. Yes! This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system. 


Q. Does the compressor come with the clutch and pulley?

A. Yes, all of our compressors come complete with the clutch and pulley unless otherwise advertised.


Q. How long does shipping take?

A. Shipping usually takes anywhere from 1 to 5 business days. The amount of time it takes for the compressor to reach your destination depends on your location.


Q. Do you accept returns?

A. Yes, we accept returns within 14 days of purchase on all unused items. Any product you return must be in the same condition you received it and in the original packaging. A return authorization number (RMA #) is required from A/C Compressors prior to returning any merchandise. Your request to return these parts must be received by us within 14 days from the date of purchase. The purchaser is responsible for shipping charges to return all parts. Returned items that are found to have been installed, dirty, tampered with, locked up, or physically damaged will not be refundable.


Q. What is the return shipping address?

Online Seller RMA ,  41 logistics Blvd, Suite A-2  #44364006 ,  Walton  Kentucky  41094  US


NOTE: In order to determine if you are purchasing the correct part, please provide us with the year, make, model, and engine size of your vehicle. Failure to do so will result in the purchaser being responsible for any and all fees associated with returning the item for a refund. If the purchaser does not send us the year, make, model, and engine size and the purchaser receives a compressor which does not fit the purchaser's vehicle, the purchaser will be responsible for the shipping costs for the correct compressor, should the purchaser decide to purchase it. 
 
 
PushAuction