PLEASE READ BEFORE USE
IMPORTANT: Avoid contact with skin and eyes. Keep away from children. Contact a doctor immediately if swallowed, or if it comes into contact with eyes.
Liquid Metal Thermal Compound MUST NOT BE USED on aluminum surfaces. Using liquid metal on aluminum heatsinks or coolers WILL PERMANENTLY DAMAGE your cooler or heatsink.
CPU surfaces are made out of nickel plated copper which is compatible with this liquid metal compound.
APPLICATION:
PLEASE SCAN QR CODE TO WATCH VIDEO INSTRUCTIONS OF APPLICATION.
1.Put on included gloves before application.
2. Clean the CPU surface and cooler surface with alcohol pads.
3. Dry the surfaces and make sure the surfaces are smooth.
4. Remove the cap and mount the included blunt syringe tip.
5. Apply a very small amount of liquid metal to both the CPU and cooler surface. Applying too much liquid metal can short circuit and permanently damage your device.(Liquid Metal is electrically conductive)
6. Use included cotton buds to spread liquid metal.
7. Liquid metal is sticky and needs a small amount of pressure to stick to a surface. Apply pressure when spreading with cotton buds.
8. Spread liquid metal on the cooler (heatsink) for better conductivity. Liquid metal is electrically conductive. If it touches another component on the motherboard, it will short circuit and permanently damage your device.
9. Now you’re ready to mount the cooler!