• 63HRC Tungsten Steel
  63HRC hardness is just right when cutting and engraving, which can maintain the toughness of the knife, but also can Maintain the sharpness of the blade, greatly reducing the chances of breaking the edge.
• Precision Ground and Polished Tip
  Easy to use, non-stick knife, fast, not easy to break the knife, discharge wood chips superior performance. (Unpolished dark colour, sticky knife, black, easy to break)
• Not only Sharp but also Wear-resistant
  The hard tungsten steel material combined with high precision grinding technology makes the tool wear resistance more strong.
• Individually Wrapped
  Excellent packaging configuration. Better protection of knives.

Tool  Selection :
To achieve your desired purpose, use a tool with as short a cutting edge as possible. Too long a cutting edge or too long a tool body will cause vibration and deflection during machining, resulting in tool damage and affecting the quality of the machining. vibration and deflection during machining, leading to tool damage and compromising the quality of the machining. We recommend the use of tools with large shank diameters.

Tool  Handling :
(1) The woodworking cutter is designed for portable and desktop woodworking engraving machines, and cannot be used in electric drills, drill presses and other machines. machines such as drills and drill presses.
(2) The cutter can process hardwood, softwood, synthetic board and other wood to produce a smooth surface, but avoid processing copper, iron and other metal materials and sand, stone and other non-wood materials. metal materials and non-wood materials such as sand and stone.
(3) Be sure to use the appropriate size of the jacket, wear and tear, not round enough and the bore with a taper of the jacket can not provide enough clamping force, will lead to the provide sufficient clamping force, which may cause vibration or twisting of the shank and fly off.
(4) Never think that the new collet - necessarily safe and reliable. When the tool is clamped and found that the shank has uneven contact marks or grooves, it is important to note that the shank is not in contact with the tool. traces or grooves, indicating that there is slippage and deformation of the inner hole of the jacket, then the jacket should be replaced immediately to avoid accidents. should be replaced immediately to avoid accidents.
(5) After the tool is clamped, if the tool is found to have jumping phenomenon, it should be stopped immediately and repeated several times. Let the tool shank and the jacket to get full contact, and then work.
(6) tool shank and jacket contact should be good, the tool shank must be completely inserted into the jacket, tighten firmly, so as to provide sufficient clamping of the tool. This can provide sufficient clamping force on the tool. Can not be only a small part of the insertion of the jacket, otherwise it is easy to cause the tool shank Breakage and lead to tool damage.
(7) Use proper eye and ear protection during operation.
(8) Keep body, clothing and other debris away from the working tool.

Knife Maintenance :
(1) Keep knives clean, remove resin, wood chips and other dirt from wood after use, use standard industrial solvents to clean knives.
(2) Apply a small amount of machine oil can prevent the surface of the tool from rusting, clean all stains on the shank of the tool to prevent slippage during use.
(3) Do not resharpen the tool and change the shape of the tool without permission, because each grinding process requires professional grinding equipment as well as professional grinding skills, otherwise it is easy to cause the edge to break and produce accidents.