Package Includes:

Lid

Funnel with Switch

45 Degree Elbow x 2

5 inches Straight Extension x 2

Large Cap A

Medium Cap B

Small Cap C

Threaded Cap D

Large Adapter A with Gasket

Medium Adapter B with Gasket

Small Adapter C with Gasket

Threaded Cap Adapter D with Gasket

Threaded Cap Adapter E with Gasket

Description：

Unique design: different from other ordinary funnels, our high-end coolant funnels have a special rotary switch, which can be closed by turning it gently to effectively prevent overflow or bubbles.

The Coolant Filling Kit Can Deliver Fluids Such as Radiator Coolant and Oil To Any Vehicle, the Long Burp Funnel Prevents Spills and Trapped air During Refills After a Coolant Flush.

The multipurpose funnel kit includes:5 Adapters, 4 Filler Caps, Two 45° elbows, Two 5“ Extender and a High Quality Transparent Antifreeze Funnel Make The Kit.

The longer extension rod is designed for hard to reach areas, and can be placed on the radiator cap at any angle in combination.The thread reinforcement design can ensure that the liquid can not leak under extreme environment.

Multi Purpose: the Spill Free Funnel is Very Suitable for Engine Flushing, Coolant Pressure Tester Kit, and Even Radiator Flushing; The Coolant Filling Kit Has a Common Spare Part for USA and Foreign Vehicles.

Instruction:

1. First install the correct sized adapter into the correct cap. Place the gasket in a downward position. Tighten the cap with adaptor to make sure it doesn’t leak.

2. If 45° elbow or extension needed, place the funnel after elbow or extension is placed well into the adapter opening.

3. Fill funnel slowly and carefully with coolant about 1/3 full.

4. When run the engine with funnel attached, fluid level should be at low position. Keep RPM on idle position. (Shut down the engine if notice the fluid level rise excessively. Wait for fluid level go lower before restarting the engine.)

5. Use Fluid Stopper for remaining fluid inside the funnel to flow to the radiator hose by squeeze it and release.

6. After finish, remove the funnel ( and or extension/elbow) & adapter, close the radiator with cap tightly.