For M.2 NVMe to PCIe 3.0 x16 Extender Gen3 8G/bps Riser Adapter Cable 90 Degree for GPU Graphics Video Cards Extension Cable

Product Model:R43SD-WK

Product Name：PCI-E Graphics Card Extension Cable

Cable Length: 25cm,35cm,45cm

Bandwidth Speed: PCIe 3.0x1 gen3 ; 8G/bps (Max.)

Purchase Restrictions: Item is for professional engineers only, does not support 3 years old equipment.

Purchase Tips: Be sure to buy 1~2 samples first to test and verify that there is no error before purchasing in bulk.

Friendly reminder: This product is compatible with a lot of problems, laptop graphics card extension external or private modification of the existence of technical problems can not be solved does not support the use. Incorrect assembly or improper operation will burn your device, non-professional engineers are prohibited.

Wire length description:

Cable length refers to the part of the visible cable, excluding the PCB and the connectors.

Accessory Note: A SATA power adapter cable is included with the shipment, and must be connected to the power adapter cable in order to have 12V power supply.

Product Advantages.

1. Cable advantage, high-frequency support for PCIe 3.0 stable transmission

2. Advantage of cable length, from 5 cm to 1 metre can be customised, this adapter cable, low cable impedance, 60 cm within the length of the cable to support PCIe3.0 full speed.

3. Differential signal no over-hole design, there is no parasitic capacitance and inductance of the signal attenuation interference problems, more CAF micro-short phenomenon, the product is durable!

4. The product selection of high-quality materials, PCB precision workmanship, copper thickness thickened to 1oz, gold-plated gold finger content, gold-plated enough conductivity is good, can reduce oxidation and rust impedance caused by elevated blue screen of death problems.

5, the product selection of the wire itself is very durable, the use of metal at the point of welding thickness of up to 3mm PCB spacer protection, and locking screws and hexagonal nut fastening, the product is strong and reliable pulling, anti-interference, there will be no broken line off the nail problem. Wire can be bent or folded, does not affect the use.

6. PCB dwarf and fat design, dwarf will not be stuck to the card, fat and long design to make the board easier to install, reduce the probability of damage.

Summary of technical questions:

Is an external power supply required?

The extension cable must be connected to the power supply cable to be used.

The extension cable's auxiliary power port is the SATA port shown below, please connect the SATA power supply.

Please pay attention to the SATA power port in the picture above and make sure that it is connected to the same power supply as your motherboard. If you have two sets of power supply, put the power supply of the extension cable and the power supply of the motherboard in the same set to avoid the problem of reverse current.

Please note that if your motherboard does not have a PCI-enhanced power supply, and the extension cable is not connected to the power supply, the PCIe interface will be overloaded and will fry your motherboard.

Be sure to recognise the direction when plugging the cable, do not plug the reverse or plug the offset, to prevent burning the device, plug the cable to hold the device's socket before plugging the cable, to avoid too much force will be socket pins plugged off.

What is the quality of the wire? Is it shielded?

Shielded, with advanced EMI shielding conductive polymer, a new material for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the EMI shielding of the conductive polymer to prevent incoming or outgoing emissions of electromagnetic frequencies, minimise interference and performance degradation, and reduce the weight of the extender.

Purchase Notes.

1. Plug in the line must be clear direction, do not insert the reverse or insert bias, to prevent burning equipment, plug in the line first hold the equipment socket and then plug in the line, to avoid too much force will be socket pins plugged off. Both ends of the wire and the circuit board within 2cm of the welded prohibit bending prohibit pulling.

2. a variety of motherboards and equipment signal drive ability and other conditions are not the same, our results do not guarantee the same test results and you, as long as the extension cable is connected, the signal will have loss, there will be compatibility issues, high demand, please do not buy.

3. graphics card or motherboard is an electronic device will increase with time and aging oxidation, and then connected to the extension cable will only be more unstable. Older devices are not supported. Your device is not supported for more than three years. Please do not purchase.

4. Limited to product engineers specified purchase, only for product testing, other purposes, please do not buy.