Feature:

1. Dual-Pin Digital Moisture Meter: Specifically designed for measuring the moisture content of most woods, bamboo, paper, cardboard, walls and more, this moisture meter is an essential tool for works with materials that can be affected by moisture levels.

2. Large LCD Screen: The wood humidity tester can clear digital display shows the moisture level, ambient temperature, and wood type indicator for easy and accurate readings.

3. 4 Wood Types to Choose: The wood moisture meter comes with 4 measurement wood groups (about 50 different woods) to choose from, allowing for accurate moisture readings on various types of woods.

4. Ambient Temperature Gauge: Timber Damp detector measures ambient temperature in two different temperature units (Celsius and Fahrenheit).

5. Data Hold Function: Dampness Moisture sensor detector can easily lock your measurement data for convenient moisture checking and recording. The low power consumption and automatic shut-off function make it a practical and energy-saving tool.

 

 

Specification:

Certification: NONE

Origin: Mainland China

DIY Supplies: Woodworking

Display Type: DIGITAL

With Backlight Or Not: YES

Model Number: Wood Moisture Meter

Principle: Resistance type

Wood range: 4~75%

Paper range: 4-90%

Wall range: 0.2-24%

Resolution: 0.1%

Accuracy: ± 0.5%

Electrode length: 10mm (0.4inch)

Electrode needle: integrated

Automatic shutdown: After no operation of the button within 5 minutes

Power supply: 2 No. 7 batteries (not included)

Product material: ABS engineering plastic

Working temperature: 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit)

Measurement temperature range: -20 to 70 degrees Celsius

Product size: 144 x 64 x 31mm/5.66x2.51x1.22inch

Description:

This instrument can measure the moisture content of over 50 types of wood, suitable for various occasions to measure the moisture content of wood and the current environmental temperature. The instrument has four wood modes such as ABCD, allowing users to take accurate moisture measurements corresponding to various wood varieties

Function:

Low battery voltage indicator symbol

Lock screen function indication

Selected wood type indication

Current moisture measurement reading

Current temperature reading

Power On Key

Wood type selection key

C/F Celsius and Fahrenheit toggle keys

Lock screen key

Reference list of wood types:

A. Teak wood, walnut wood, white red bean tree, rubber tree, cork, mahogany, persimmon wood, alder wood, neem, Chinese toon, sour jujube, yellow pear, chicken wing wood, agarwood

B. Clone, poplar, beech, cedar, sassafras, catalpa, camphor, nanmu, maple, Soviet poplar, large leaved poplar, Populus euphratica

C. Liu'an, Manchurian ash, elm, fir, maple, sandalwood, oak, cherry, hemlock, cypress, Quercus, Manchurian ash,

D. Basswood, Larch, Birch, Korean Pine, Camphor Pine, Huashan Pine, Madai Pine, Masson Pine

Measurement steps:

1. Remove the battery cover, install two No. 7 dry batteries, and press the power button once to turn on the machine.

2. Remove the electrode needle cap and expose the electrode needle.

3. Press the "MODE" button to select the appropriate wood calibration scales A, B, C, and D (refer to the wood calibration table later in this guide) to measure the corresponding wood.

4. Insert the needle into the material and read the current displayed data. Press and hold the HOLD key once to lock the display reading.

5. Read the current ambient temperature. Press the C/F key to switch between Celsius and Fahrenheit degrees.

6. Press the power button once to turn off the instrument power

 

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

 

 

1 x  Wood Moisture Meter

1 x Instructions