EASUN Lifepo4 Lithium Battery 48v 51.2v 100Ah/5wh 200Ah/10wh Li-ion Parallel 15p 6000+ Cycle BMS for Solar and Home
Features: 1. LCD monitor the energy storage power data and operating status. 2. High-quality LiFePO4 battery, safety, deep cycle and long lifespan. 3. Product round edge be more safe, avoid accident collision. 4. External main switch to reduce product power consumption andimprove safety. 5. Wall brackets, which can meet the installation and use of different place. 6. BMS bulit inside, over-voltage, over-load, over-temperatureprotection, etc. 7. Compatible, can be connected to different types of loads within thevoltage range. 8. Support up to 15 units in parallel. |
Note:
If you are not sure, you can send us your inverter brand model, or parameter label and communication interface.
Q: Is this battery waterproof?
A: Not waterproof, IP21, and needs to be installed inside the building.
Q: How do I connect the battery to the inverter?
A: The product includes a user manual, and you can also contact us for a installation video.
Q:How many years warranty?
A: 3 years warranty, more than 5 years life for normal use.
Q: Can this battery communicate with the inverter?
A: It Can communicate with the inverter. The battery is equipped with a communication cable and the connector is RS485.
It can communicate with inverters with RS485 interface, other interfaces need to look at the interface pins.
Model | PC-51.2V-100AH | PC-51.2V-200AH |
Nominal Voltage | 51.2V | 51.2V |
Nominal Capacity | 100AH | 200AH |
Effciency | ≥96% | ≥96% |
lnner Resistance | 10mΩ | 7mΩ |
Cell Type | LiFePO4 | LiFePO4 |
Charge Voltage | 58.4V | 58.4V |
Standard Charging Current | 20A | 40A |
Max. Continuous Charging Current | 100A | 100A |
Standard Discharge Current | 20A | 40A |
Continuous Discharge Current | 100A | 100A |
Peak Discharge Current | 200A(3S) | |
Discharge Cut-off Voltage | 42V | |
Charge Temperature Range | 0~60°C | |
Discharge Temperature Range | -10°C~65°C | |
Storage Temperature Range | -5~40°C | |
Storaqe Humidity | 65±20%HR | |
Size(LxWxH) | 440×170×560mm | 440×206×670mm |
Package Size(L×W×H) | 625×520×335mm | 750×520×385mm |
Shell Material | SPCC | |
Net Weight | 42kg | 76kg |
Gross Weight | 53kg | 91kg |
Package Method | 1pcs per carton | |
Cycle Life | ≥6000 times | |
Self Discharge | 2% per month | |
SOC Indication | LED Light & LCD Screen | |
Communication Protocol | RS485/CAN | |
Communication Inverter | Growatt, Goodwe, Deye, Luxpower, SRNEetc |
The purpose of lithium battery maintenance is to keep the performance of the lithium battery in use. Because the lithium battery is generally normal or not when it is working, and during the use of the lithium battery, the battery performance declines, the life is attenuated, and the charging is not normal, etc. Problems can be seen everywhere. √ Correct charging of lithium battery 1. In order to make the new battery achieve the best use effect in a short period of time, it can be fully charged and discharged three times or more, of course, it is not necessary to do so. If there is such a requirement in the manual, it should be done according to the requirements of the manual, which is conducive to the maintenance of lithium batteries in the future; 2. Choose a charger produced by an authentic lithium battery charger manufacturer, and operate according to the instructions. When using a fast charger, if the indicator light changes, it means that it is 90% full. Don’t worry at this time, you can wait until the battery is fully charged; 3. The working temperature is between -20°C and 60°C. For this reason, it is best to charge at room temperature, and do not cover other things on the phone while charging. |
√ Scientific discharge of lithium battery 1. The discharge current should not be too large Excessive current will cause internal heating of the lithium battery, which may cause permanent damage. The larger the lithium battery discharge current, the smaller the discharge capacity and the faster the voltage drop. 2. Never over discharge Lithium battery discharge should not exceed 80% of the battery capacity in order to better protect the battery. The internal storage of electric energy in lithium batteries is achieved by a reversible chemical change in electrochemistry. Excessive discharge will cause this chemical change to have an irreversible reaction. Therefore, lithium batteries are most afraid of over-discharge. Once the discharge voltage is lower than 2.7V, it will May cause the battery to be scrapped. The lithium battery of the mobile phone has been installed with a protection circuit inside. Before the voltage is low enough to damage the battery, the protection circuit will work and stop discharging. 3. Do not discharge with high power When the lithium battery is discharged, Li+ is deintercalated from the negative electrode and inserted into the positive electrode through the electrolyte, and the positive electrode is in a lithium-rich state, that is, the battery will be discharged under normal use, and the opposite is true during charging. The voltage attenuation of the lithium battery decreases faster with the increase of the discharge rate, and the earlier the time to reach the termination voltage is, but the rate of decline at the end becomes slower; therefore, the characteristics of small rate discharge are better than high rate, and try not to discharge with high power. |
√ Proper storage of lithium batteries 1. The best storage temperature is between 4°C and 35°C. Do not expose the battery to high temperature or severe cold. A lithium battery that has been activated is usually on hold for at least half of the time, so a suitable temperature is very important for lithium battery maintenance. has the most frequent and most important meaning; 2. Lithium batteries that have not been used for a long time should be charged and discharged once a month similar to "activation", and a power calibration should be done once a month. Because lithium batteries that have not been used for a long time will passivate the battery electrodes, the electrons in the lithium battery should be in a flowing state, passivation will destroy the electrode structure, thereby affecting the battery life. Of course, the best case is to keep it half charged. 3. It is forbidden to store in places with strong static electricity and strong magnetic fields, otherwise it will easily damage the battery safety protection device and bring unsafe hidden dangers. 4. If the battery emits peculiar smell, heat, discoloration, deformation, or any abnormality occurs during use, storage, and charging, immediately remove the battery from the device or charger and stop using it. 5. The electrodes of discarded batteries should be wrapped with insulating paper to prevent fire and explosion. Any method will be effective under certain conditions. The maintenance measures for lithium batteries are not to prolong the life of lithium batteries, but to prolong the service life of lithium batteries within the effective cycle period of lithium battery design. If you don't know how to maintain it, it will speed up the aging of lithium batteries. Correct maintenance methods can make our lithium batteries more durable. |
1.Items werden im Allgemeinen innerhalb von drei Tagen versendet, nachdem Ihre Zahlung freigegeben wurde (Samstag. & Sonne. ausgeschlossen). 2. Alle Einzelteile werden an die Paypal-Adresse des Käufers versendet. Bitte überprüfen Sie Ihre Paypal-Adresse, bevor Sie die Bestellung aufgeben. 3. Wir sind nicht verantwortlich für falsche oder unzustellbare Adresse. Wir behalten uns das Recht vor, die Versandkosten für zurückgesandte Artikel wegen falscher Adresse erneut zu berechnen. |
Wir akzeptieren Zahlungen per PayPal, Visa, Mastercard, Apple Pay, Google Pay etc. Bitte zahlen Sie das Geld innerhalb von sieben Tagen nach Ende der Auktion. |
1.We bieten 30-Tage-Rückgabepolitik für unbeschädigte, ungenutzte und wiederverkäufliche Produkte. Das Produkt ist nach Ablauf der 30-tägigen Rückerstattungsfrist nicht erstattungsfähig. 2. Unsere Garantie erstreckt sich nicht auf Produkte, die physisch beschädigt sind oder nicht unter normalen Betriebsbedingungen infolge von Missbrauch oder unsachgemäßer Installation seitens des Käufers/Benutzers sind. 3. Für alle zurückgegebenen Produkte kontaktieren Sie uns bitte für die Rücksendeadresse. 4. In allen Fällen zahlen Käufer Versandkosten auf eigene Kosten, um Produkte zum Umtausch oder Rückerstattung zurückzugeben. Wir sind nicht verantwortlich für das Porto von Ersatzlieferungen. Die Rückerstattung erfolgt nach Erhalt des zurückgegebenen Artikels. |
1.We sind zu Ihrer Zufriedenheit nach Ihrem Kauf verpflichtet. Wenn Sie mit Ihrem Kauf in irgendeiner Weise nicht zufrieden sind, geben Sie uns bitte die Möglichkeit, zu versuchen und es richtig zu machen, bevor Sie Feedback hinterlassen. 2.We beantworten Ihre Frage innerhalb eines Werktages. 3.Wenn Sie Fragen vor oder nach der Zahlung haben, zögern Sie nicht, mit uns in Verbindung zu treten, wir helfen Ihnen gerne. |
1.We brauchen wirklich Ihr positives Feedback und fünf Sterne. 2.Bei eBay wird eine NEUTRAL-Feedbackbewertung wie ein NEGATIVE-Feedback behandelt. Bitte hinterlassen Sie kein negatives oder neutrales Feedback, ohne uns zu kontaktieren, bitte geben Sie uns eine Chance, die Angelegenheit zu lösen und Sie zufrieden zu stellen. |