Included Items- Fan to GPU Adapter (with offsets to be chosen from dropdown menu)
- Centrifugal 4-pin 4-wire fan (PWM-signal controlled)
- 4 screws that secure shroud to fan
- 3 bolts that attach shroud to GPU
Fan comes attached to the shroud in the orientation pictured on default photo in this listing, with 4 out of 8 possible holes drilled in fan body in positions pictured, unless you instruct otherwise.
Compatible Video Cards
- Nvidia Tesla M40
- Nvidia Tesla K80
- Nvidia Tesla P40
- Nvidia Tesla P100
- Nvidia Tesla V100
Specification for Included Fan
- Brushless Delta BFB1012VH
- Connector: 4-pin
- Lead: 4 wires
- Voltage: DC 12 V
- Current: 2.70 A
- Power: 18 W - 32 W
- Speed: 4500-6000 RPM
- Air volume: 38 CFM
- Wind pressure: 2.814
- Noise: 55 dba
- Size: 97 x 94 x 33 mm
- Made in Thailand
NB: this is server-grade turbo fan, it is powerful and loud: it is sufficiently powerful to keep dual-GPU cards such as K80 cool on full load.
NB: pictures show shroud with BFB1012EH which is very similar to BFB1012VH. We will ship with BFB1012VH for which we include detailed description above.
NB: before purchase please make sure your motherboard or power arrangement can take a 4-pin connector, deliver ~3A current and you require a PWM fan: the fan that is included is PWM-signal-controlled, which means the speed is adjusted by sending a PWM signal.
Specifications for Included Offset Shroud
- width: 37 mm (more than GPU itself or double slot width)
- length: 36 mm (along the GPU-fan axis)
- height: 93 mm
- vertical offsets available: +3, 0 and -3 mm
- horizontal offsets available: +10 and -10 mm
As an example, for variation with offsets +0 +10 (vertical offset of 0 mm and horizontal horizontal offset of +10 mm) with fan and GPU assembled, please visit Ebay item https://www.ebay.co.uk/itm/374703677652 .
(2) Construction and Assembly
- PETG plastic
- 0.2mm high-quality print
- shroud has holes to secure fan in; this requires drilling 1.5 mm holes in fan housing and screws
- shroud attaches to GPU via three standard hard drive bolts
- fan can be inserted in two orientations; please consult pictures for orientations
- GPU+shroud+fan assembly goes beyond two-slot void and is not centered on the card
- shroud should be installed after cable is plugged in due to space constraints
If you need to adapt this part for your specific needs or produce a new custom design with different offsets, please contact us with description for a quote.
Dodrotu Limited
https://www.dodrotu.com