- INDULGE Touch Flex
- Indulge Touch Flex Smart
- Matt Black
- Includes Handshower, overhead shower and slidebar
- Distance rail bracket adjustable
- Smooth black hose 1,5m 1/2" x 1/2" twistfree non conductive
- Shower arm 400mm with free fixation
- Spray force - increased spray force for sensational showering experience
- Zero hole - fullcover spray pattern
- Power Rating: 9.5kw
- A Min Dynamic flow pressure of 100 K /Pa ( 15 ib / Sq In ) - 1.0 BAR is required
- A Max Static pressure of 500 K /Pa ( 75 ib / Sq In ) - 5.0 BAR should not be exceeded
- Advantages:
- Fiber reinforced Tank - less limescale, extended life, energy efficient, burst resistant
- Controls:
- Start/Stop button
- Easy Grip - temperature control
- Three-way ceramic divertor to switch between Overhead and Handshower
- Shower Fittings:
- Integrated rail in electric shower 600mm with free fixation and front load slider
- Distance between rail brackets adjustable
- all chrome unless otherwise indicated
- Ceramic diverter
- Overhead shower 200mm with air technology
- Showerarm 300mm
- Handshower 100mm diameter, 3 spray pattern: rain, massage, mix air technology
- Rub clean nozzles
- Installation:
- Electrical connection
- Water entry points right - top, bottom, back
- All indulge and AQUAMAX models have a water connection that is suitable for a "right" only water supply connection.
- The water connection pipe is not reversible.
- Use standard UK plumbing connections - compression - Push fit.
- Cable entry points left hand side - top, bottom, back : right hand side - top, bottom, back
- Outlet connection 1/2" compression and pushfit 1/2"
- Power Input:
- A Power Input of 240 V and 40 amp circuit breaker is required for max output ( 9.5 KW ) anything less and the heater will not operate at max efficiency
- Approvals: BEAB, CE; ROHS
- Safety:
- Thermal protection: Overheating indication if temperature exceeds 47°C - automatic reduction of power mode
- Low pressure sensor – automatic reduction of power .
- If flow drops immediately – shower will reduce power mode to lower level
- Outlet temperature sensor reports back to CPU temperature and would reduce power mode
- Cold start technology – when closing the shower, the temperature display will countdown 6 seconds to final closure of the water. Cold water keeps running during this period to cool down heating coil and prevent scalding in case of an immediate restart
- ELECTRICITY LEAKAGE – SAFETY FEATURE
- If the event of any electrical leakage above 15 M/ Amps , the heater will automatically close down for maximum safety