Note: The Buyer is responsible for the customs expenses incurred at the destination.
New function: with working time setting, users can use the function of battery peak shaving and valley filling
The grid tie power inverter is the most efficiency and technologically advanced inverter for solar power system.
Low cost and easy installation--it can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. Big LCD display, all adjustable parameter.
Free combination -- it can be used as a separate grid tie system and can be setup as a large solar array with many of them.
Improving the efficiency of the entire solar power system-- Because of MPPT function. So every panel is working at the maximum.
Low power consumption, over current protection, over temperature protection, reverse polarity protection, etc.
Why we produced the GRID TIE INVERTER WITH LIMITER ?
It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated --- because in some countries,the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem.
2000W,DC45-90V Technical Data:
Continuous Power Output:1950W
Peak Power Output:2000W
Input DC Voltage Range:45V ~ 90V
Peak power tracking voltage:50V-90V
AC Output Voltage Range:190VAC ~ 260VAC
Output Frequency:46Hz~65Hz
Standby Power Consumption:<0.5W
Total Harmonic Distortion:<5%
Peak Inverter Efficiency:92%
MPPT Efficiency:99%
Power Factor:0.99
Output Wave Form:Pure Sine Wave
MPPT Function:Yes
Over Current Protection:Yes
Over Temperature Protection:Yes
Reverse Polarity Protection:Yes
Anti-Island Protection:Yes
Stackable:Yes
Weight ( Kg):6kg
Dimensions (W x H x D):434x196x88 mm
Inverter compatible with 60/72V batteries
110V and 230V automatic recognition
Applied Standards:VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06
Grid Tie Inverter DC Input 45-90V(Starting Voltage 49V).Solar Panel Voc cannot be higher than 90V. fit for open circuit voltage 76-90V (Voc) (Note: Please use solar panels with the same specifications)
Only use the 60V/72V battery to power the inverter.(Note: Use a battery to power the inverter, please use a circuit breaker.)
This is the 2nd generation grid tie inverter with limiter.
With the 2nd generation GTIL,we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed,reduced customer’s cost,more easier for installation.But in case customer install inverter far away from the main circuit breaker,we also enable the 2nd GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting.
How to use the Inverter ?
1. Standard Grid Tie Inverter Model
one unit inverter
more than 1 unit inverters stackable
1.1. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load.
1.2. All excess power that is not needed by the load is then exported to the Grid.
1.3. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again.
1.4. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid.
1.5. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid.
2. Using Grid Tie Inverter With Limiter Model
2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid.
2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time.
2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically.
3. Installation of GTIL With Internal Limiter
3.1 This installation is not require an additional limiter module,Installation is much easier.Clamp the current sensor cable to the hot wire to measure the current,the internal limiter will auto detect the load power and control the inverter output power,excess power will be well controlled.
3.2 External protective device including dc and ac SPD(Surge protection device),dc and ac breaker,etc is recommended to installed in the system.
4.Limiter Setting on the LCD of the inverter:
The GTIL include three working mode:Work as normal GTI without power limitation.Work under Internal limiter mode and Work under External limiter mode,Pls make your setting on the LCD and save it,details setting operation,pls read the GTI manual.
5 Battery Discharge Power Mode:
New upgraded firmware enable battery or solar limiter current and power model.
User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter .
User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged.
6 Limiter Module Specification:
1. Clamp sensor- Max 100A
2. Wattmeter- Max 9999w
3. Terminal Block-Max 20A
4. Receptacle- max 2000w
5. Clamp sensor signal- 5v AC max mA
6. DC signal Cable- 5v DC, max mA
7.Package:
1 x Solar Grid Inverter with Limiter
1 x AC cable
1 x Internal type Limiter clamp with sensor & 2m cable
1 x English User Manual
Bat or solar limited current mode:
This function is usable while using with battery.the setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating.This can prevent the battery from over discharged.The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting.Set is 0.1V/step.
Reboot voltage:This setting voltage means while battery charged back, the inverter will auto restart after voltage reached the setting point.It convenient the user and make the function very flexible.Set is 0.1V/Step.
Most of the customers' faults are the use of batteries. Because the inverter has been working at high power and high current.
It is recommended to set the discharge power of the inverter to prevent the inverter from running at full load all the time. Any electrical equipment will be prone to failure if it works at full load for a long time. Because the internal heat will be more serious.
Shipping Policy:
1. Items are usually shipped 1-3 business days after payment has been received.We do not ship on weekends and holidays
2.Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.
3. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive the item after 30 days, please contact us, we'll investigate and solve the delivery problem.
4.International buyers are responsible for duties and customs fees.We are not responsible for any customs duties or import taxes (if any)
5.Buyer from remote area should pay 35 USD more for the remote delivery service.(Only for Business Express )
Payment Method:
1. Payment methods accepted : Paypal only.
2. All major credit cards are accepted through our secure payment processor PayPal.
3. Payment must be received within 4 business days of auction closing.
4. We only ship to the confirmed address provided by ebay. Before you pay, please make sure your address in ebay matches the address you would like us to ship to.
Returns Policy:
1.One Year Warranty. Buy with confidence!
2. Refund or replacement request is available only requests within a week after parcel received & returning the item as the same condition as received.Please include your eBay ID and brief description of defective problem in your return package.
3. Defective situation must be noticed within 7 days after delivery.
4. Buyer must pay the return postage for any return reason.In return,we will pay the shipping fee for send it back to you.
5.Replacement or refund will be issued after the items are recevied by us in good condition.
Feedback:
1.We maintain all excellence 5 star DSR and strive for 100% customer satisfaction! Feedback is very important to us.
2.Please do not give us any bad feedback. Or contact us before you open a case. If you can do as we say, we will be very grateful.Please give us the opportunity to resolve any problem.
Duties:
1.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's' customs office to determine what these additional costs will be prior to bidding/buying.
2.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up, do not confuse them for additional shipping charges.
3.Custom holds and delays vary from country to country and are beyond the control of the seller. Please do not hold us responsible for delivery delays caused by customs related issues. Thank You!