This MESR-100 auto-ranging capacitor and low Ohm meter measuring from 0.001 to 100.0R, support in circuit testing. Using true 100 KHz sine to measure the value, which is equal to the testing method of capacitor manufacturer.
Features:
It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).
The impedance become small, and can then measure the true series resistor value.
Using this , can measure the capacitor is bad/ damaged or in condition.
Our meter only applies less than 15mV or to on a capacitor, as a can use it as in circuit test.
During repairing TV, LCD, Audio board, etc. can in circuit testing the capacitor is or not.
Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed table for fast check.
Equipped with a alligator clip for more accurately testing. plating on the surface, which is -corrosion and oxidation resistance.
Specifications:
Color: Black
Accuracy(After , Refresh (Manual Mode)
tested with 1,10,100R Auto mode take 0 to 2s, more
resistor) depends on capacitance value.
0.000 to 1.000R 1%+2Digit ～0.4s
1.000 to 10.00R 1%+1Digit ～0.4s
10.00 to 100.0R 2%+1Digit ～0.4s
Accuracy: Up to 1% (detail on above table)
Wide Measurement : >1uF
High Resolution: 4 digit, or 0.001Ohm @ 1
Measuring voltage: <～40mV RMS (TESTING VOLTAGE)
External : 5V USB
Operating Current: 0.02A
: 2 * AA 1.5V (not included)
: >80 Hours
Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in
Item Weight: Approx 139.6g / 4.9oz
Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in
Package Weight: Approx 218g / 7.7oz
Package List: E13872
1 * Capacitance Meter
2 * Test Clips
1 * Clip
1 * User Manual
Note:
The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.
Features:
It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).
The impedance become small, and can then measure the true series resistor value.
Using this , can measure the capacitor is bad/ damaged or in condition.
Our meter only applies less than 15mV or to on a capacitor, as a can use it as in circuit test.
During repairing TV, LCD, Audio board, etc. can in circuit testing the capacitor is or not.
Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed table for fast check.
Equipped with a alligator clip for more accurately testing. plating on the surface, which is -corrosion and oxidation resistance.
Specifications:
Color: Black
Accuracy(After , Refresh (Manual Mode)
tested with 1,10,100R Auto mode take 0 to 2s, more
resistor) depends on capacitance value.
0.000 to 1.000R 1%+2Digit ～0.4s
1.000 to 10.00R 1%+1Digit ～0.4s
10.00 to 100.0R 2%+1Digit ～0.4s
Accuracy: Up to 1% (detail on above table)
Wide Measurement : >1uF
High Resolution: 4 digit, or 0.001Ohm @ 1
Measuring voltage: <～40mV RMS (TESTING VOLTAGE)
External : 5V USB
Operating Current: 0.02A
: 2 * AA 1.5V (not included)
: >80 Hours
Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in
Item Weight: Approx 139.6g / 4.9oz
Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in
Package Weight: Approx 218g / 7.7oz
Package List: E13872
1 * Capacitance Meter
2 * Test Clips
1 * Clip
1 * User Manual
Note:
The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.