Important note: The monitor must level with your heart,don't move or talk during testing,
                           this is critical step to get accurate results.
Note: Batteries Not included 
Important: 
-Apply cuff as illustrated in the manual and tighten firmly before starting the reading 
-Take blood pressure at the same time every day. In the morning shortly after getting up is best 
-Don't use the monitor in a very cold environment,don't use monitor when you want to discharge urine 
-Avoid eating, alcohol, smoking, exercising, medications, and bathing for 30 minutes before measuring blood pressure 
-Rest in a chair for 5 to 10 minutes before taking a reading,don't talking or moving when measuring 
-Sit in a comfortable position and rest your arm on a table at approximately heart level for the reading 
-Note that your blood pressure can vary significantly in as little as a few minutes 
-For maximum accuracy you can use the option to average your last 3 readings 
Specifications 
Measuring range :Blood Pressure : 30~280 mmHg Pulse Rate : 40~199 beats/min 
Calibration Accuracy : Blood Pressure : ± 3 mmHg Pulse rate : ± 4% of reading 
Operating environment : 50 °F ~104 °F 
with relative humidity up to 85% (non condensing) 
Storage/ Transportation environment : 
with relative humidity up to 85% (non condensing) 
Power Source :2 x 1.5 V AAA batteries（not included） 
Weight :approx. 4.23oz (exclude batteries) 
Dimensions :approx. 71mm x 84mm x 32.2mm (W x H x D) 
Cuff circumference (M Size) : approx. 4.92~8.26inch (12.5~21 cm) 
Blood Pressure : 30~280 mmHg 
Pulse Rate : 40~199 beats/min 
Blood Pressure : ± 3 mmHg 
Pulse rate : ± 4% of reading 
Package include: 
1x Blood pressure monitor wrist type 
1x storage case 
1x manual 
(Batteries NOT included) 
 

Suggestions for Measuring Blood Pressure
Avoid eating, drinking, smoking, or exercising for at least 30 minutes before  taking a measurement. You should also
 try to measure your blood pressure at the same time each day.Measurement should be taken in a quiet place and you 
should be in a relaxed, seated position.
1. Align the wrist cuff with the level of your heart and gently support your left arm with your right hand. 
Do not place your right hand on the cuff itself.

2. Press the START/STOP button.
Remain quiet, sit still and do not talk during the measurement.
Notes:
* Always wait at least 2-3 minutes before taking another blood pressure measurement.
You may require more rest time between readings depending on your individual physiological characteristics.
* Always wrap the wrist cuff around your wrist before starting to take a measurement.
* Do not measure your blood pressure while you are in a vehicle.
* Always measure your blood pressure on the same wrist.

How to Apply the Wrist Cuff

1. Roll up your sleeve so that the monitor is in direct contact with skin. Do not apply over clothing.Make sure that your
 sleeve is not too tight and does not constrict the flow of blood in your arm.
2. Place the wrist cuff over your left wrist with your left thumb facing upward.

3. Hold the bottom part of the wrist cuff and wrap it around the wrist while pulling so that it fits comfortably.
Make sure that the wrist cuff does not cover the protruding part of the wrist bone (ulna) on the outside of the wrist.
Unless the wrist cuff is wrapped securely around the wrist, it may not be possible to take correct measurements.

4. The remaining part of the wrist cuff can be conveniently folded back out of the way

Taking measurements on the right wrist Measurements can also be made on the right wrist.
Fit the monitor on the right wrist as shown.

Blood pressure Q&A

Q: What is the difference between measuring blood pressure at home or at a professional healthcare clinic?

A: Blood pressure readings taken at home are now seen to give a more accurate account as they better reflect 

your daily life. Readings can be elevated when taken in a clinical or medical environment. This is known as White 

Coat Hypertension and may be caused by feeling anxious or nervous.

Q: What causes different readings?

A: Blood pressure varies throughout the course of a day. Many factors including diet, stress, cuff placement, etc.

may affect an individual’s blood pressure.

Q: Should I apply the cuff to the left or right wrist? What is the difference?

A: Either wrist can be used when testing, however, when comparing results, the same wrist should be used. 

Testing on your left wrist may provide more accurate results as it is located closer to your heart.

Q: What is the best time of day for testing?

A: Morning time or any time you feel relaxed and stress free.

 

Note: Abnormal test results may be caused by:

1.       Improper cuff placement

Make sure cuff is snug-not too tight or too loose.

2.       Improper body position

Make sure to keep your body in an upright position.

3.       Feeling anxious or nervous

Take 2-3 deep breaths, wait a few minutes and resume testing.

Troubleshooting
Problem: Blood pressure results are not within typical range,Why?
Cause 1: Cuff is too tight or not properly positioned on the wrist
Solution: Firmly reposition cuff on wrist making sure no wiggle is present.
Cause 2: Inaccurate test results due to body movement or monitor movement
Solution:Sit in a relaxed position placing wrist level with heart.Avoid 
speaking or moving body parts while moving body parts while testing.
Problem:"Err" displayed
Cause 1:Cuff fails to inflate properly
Solution:Make sure hose is properly fastened to cuff and monitor unit
Cause 2:Improper operation
Solution:Read user manual carefully and re-test properly.
Cause 3: Pressurization is over 300mmHg
Solution:Read user manual carefully and re-test properly.