:: Dynamic Sounds ::
amazing
logo
delivery
  • InCarTec 21-118K Nissan Navara, Qashqai Grey Rectangle to Din Car Antenna Adapter (With Male Bullet Connection)

  • gal
  • gal

Item Details

Nissan (grey rectangle female antenna to male DIN connection) car aerial antenna adapter cable.

This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, used when fitting a new aftermarket stereo.

Compatible with following vehicles:

Car Make / Model Year Remarks
Nissan Qashqai 2007 - 2013 1st Gen (J10)
Nissan Navara 2005 - 2016 (D40)

The loose blue wire (male bullet) on the adapter needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car.

For antenna adapter with loose blue wire please use product 21-118

PLEASE REFER TO THE CONNECTION OPTIONS IN THE MAIN IMAGES AND INSTRUCTIONS

Connection options

Option 1

This requires connecting the loose blue wire (male bullet connector) on the antenna adapter to the antenna turn-on wire (Female bullet connection) on our 29- Series steering wheel control interface.

  • Connect the vehicle specific connector to the original AM/ FM antenna connection in the car.
  • Connect the DIN aerial connection to the back of the after market radio.
  • Connect the bullet connector (on the blue wire) to the blue antenna turn on wire on the 29-Series interface.

Option 2

This requires connecting the loose blue wire (male bullet connector) on the antenna adapter to the antenna turn-on wire (Female bullet connection) on the new aftermarket radio harness.

  • Connect the vehicle specific connector to the original AM/ FM antenna connection in the car.
  • Connect the DIN aerial connection to the back of the after market radio.
  • Connect the bullet connector (on the blue wire) to the blue antenna turn on wire, or the blue/white remote turn on wire coming from the new aftermarket radio harness.

Aerial Adapter

An Aerial Adapter is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapters are available in both ISO and DIN versions. Antenna Aerial Adapter, converts car specific antenna connector to a universal aftermarket connector.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

IMPORTANT NOTE: Please make sure that is the correct Aerial Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

Delivery Timescale

delivery

Terms & Condition

our showroom

img