Motorcycle Car Tyre Repair Tubeless Seal Strip Plug Tire Puncture Recovery New

Specifications.
Color:Brown
Material:Rubber
Sizes:100*6mm
Quantity: 5Pcs
Made of high-quality rubber material, extremely high usability.

Methods:
1. Circle the punctured part of the tire with a good mark and pull out the puncture.
2.Use the tire repairing probe to detect the direction of penetration of the puncture hole, and insert it in the direction of the puncture hole to remove the dust and debris in the puncture hole.
3. Cut the rubber strip - - end into a beveled mouth through the eyelet at the front end of the needle insertion tool, so that the length of the rubber strip at both ends of the eyelet is basically the same.
4. Insert the needle with rubber strip into the tire along the broken hole, make sure the rubber strip is inserted into 2/3 of the length (you must make sure that the rubber strip penetrates the tire body to avoid the tire being inflated).
(must make sure that the cold patch adhesive strip penetrates the tire body to avoid slipping out after inflation), and rotate the fork needle 360 degrees and then pull out the fork needle.
5. Remaining outside the tire patch adhesive strip, leave 5mm length in the tread and cut off the rest.