Specification
●Application Projector
●Lamp type 180W
●Lamp life 2000H
●Warranty 90 days
●Compatible with P1120 / P1220 / P1320H / P1320W / X1120A / X1120H / X1220H / X1320 / X1320WH
(Without Housing)
Instruction steps to replace a lamp :
1. Make sure that your power switch is off and that the power cord is unplugged from the electrical
socket. It is also wise to unplug any other cables and label them in order to restore them in the
right way once the lamp is replaced.
2. In order to see the lamp, remove the access handle on the outside cover. You may need to use a
screwdriver.
3. Pull out the used lamp and clean the relevant parts using micro fiber products and not paper.
Please note that in some projectors a small inside filter should also be replaced.
4. Insert the new lamp into the projector carefully avoiding touching the glass of the lamp itself.
Touching the lamp will deposit skin oil that will likely damage any new lamp during use.
5. Reassemble the access panel, reconnect the cables and power up the projector.
Note: We also sell other model projector lamps. If you need, please contact us.
Package
1pcs x Projector Lamp (Without Housing) |