Versatile, high reliability SSI displacement meter gate opening instrument
The Model SMM1312-XS series of 160*80 standard instrument enclosure

a) join the various brands of SSI signal sensor
b)SSI signal and redundant hot standby SSI module to connect the PLC and instrumentation in this section

c) strong signal with anti-power fault-tolerant, more reliable and secure
d)10-26 bit adjustable, Gray code, pure binary code optional
e) lap, multi-turn absolute encoder, magnetostrictive linear sensor
f) intelligent panel settings, a variety of functions displacement control applications
g) RS485 digital communication and 4 to 20mA, 4 to 8 o'clock switch a variety of output signals

Operating parameters:
Input signal: the absolute value of the synchronous serial SSI signals (single-ring, multi-turn encoders, linear sensors 10 to     26)  One external set signal
Operating voltage: 220Vac.
External power supply: provides sensor power supply (specify when ordering voltage and current consumption)
Output forms: all the way 4~ 20mA analog output. Output of the D/A Accuracy 10.
Way RS485 output of the all-digital, bring their own communication protocol, and also according to customer requirements.
Default location output, dry contact relay, the sensitivity can be set to switch in the form can be set
K4-type four preset position switch output
K8 type 8 preset position switch output
Ambient temperature: -10~60
Relative Humidity: 90%
The digital display: 6 digital display, the decimal point position can be set.
The zero setting: can be anywhere on a zero or set the specified location.
Cycle length settings: every lap length of the rotary encoder settings.
Scale factor: the scale factor set of code values of linear displacement sensor.
Forward and reverse settings: the encoder and the linear displacement sensor positive and negative settings.
Output adjustment: 4 to 20mA output corresponding to the value set. 4mA, 20mA output signals fine-tune the zero, the tone is full
Communication Output: RS485 output, address, rate setting, the communication protocol is also available upon request.
Nonlinear setting: can the 16-segment non-linear set or field correction can be used to winch the laminated set of radial gate.
PLC redundancy hot backup: SSI signals can be connected PLC for SSI module, and SMM13/12-XS redundant hot prepared. (For this feature ordering specify)
Additional remote display table:
The SMM13/12-XS output signal all the way into the PLC, all the way into the remote display instrument (Optional RS485 digital display or 4-20mA display table) 

Industrial applications:
The SMM1312-XS series as a multi-functional control instruments can be used in many industries, equipment monitoring control from OEM equipment to the site environment. SMM13/12-XS plug-in easy installation, can be directly installed in the electrical cabinet.
For the opening of the hydraulic cylinder stroke, hoist the gate.

Used to enhance the positioning of the machine cranes, overhead traveling crane driving positioning, Oxygen Gun positioning, converter positioning, height measurement of the gas tank.

High accuracy for the various sectors of the automatic storage, paper and textile volume was convinced that long, long distance measurement positioning.