Features:

1. Main purpose: As an adapter for DIY cleaning of fuel injection nozzles, remove the fuel injection nozzles from the engine, and then you can clean them separately. When the injector is clogged, you can use it to save expensive nozzles.
2. Compatibility: This DIY nozzle cleaning adapter kit is easy to clean the nozzles of most cars and motorcycles.
3. Working principle: The electrical port of the fuel injector is connected to a 12V power supply through this cable. After turning on the power, the solenoid valve opens. At the same time, the cleaning solution is first flushed through the white tube and then through the sprayer.
4. Packing: Includes two white tubes and two clamp charger cables to fit two samplers of different sizes.
5. Work requirements: It requires a combination of 12V DC power supply and aerosol from injectors or carburetor cleaners not included . Prepare these necessary tools. No need for compressed air.

 

Notice:

Actual color may be slightly different from the image due to different monitor and light effect.
Please allow 1-3cm deviation due to manual measurement.

 

Description:

Material: metal, plastic
Input voltage: DC 12-24V
Cable length: about 90cm

WARNING

1, Do not continuously energize the injector for more than 10 seconds.

2, Do not spray carburetor on human body.

3、Do not use open flame or high temperature on the way.

4, Do not start the car

 

Package including：
2 x wire clamp
2 x fuel cleaning nozzle