600W MPPT Solar Grid Tie Inverter DC28-50V Waterproof Pure Sine Wave Inverter
Note: Australian buyers may need to pay customs duty. And most parts of Australia are remote and may incur additional remote charges.
These are paid by the buyer. If you mind, please don't buy it. You can contact us before ordering. Thanks!
LCD Display,Remote Meter:
Automatic identify the inverter, and display relevant parameter data and system working status
Screen data : ac voltage,current and frequency,generating capacity,power factor
Recently, many customers are inquiring: what is a balcony power station? Plug and play system?
It is a very popular small photovoltaic system at present.
The main components are: solar panel + micro inverter + plug cable + bracket.
The balcony power station is a "small" solar system that can be installed on balconies, roofs, garages, terraces, or gardens, with a wide range of uses. The Y & H inverter is produced recording to the VDE-AR-N 4105/CEI (IT) standard, and due to its output power of only 600 watts, no electrician is required during installation and can be put into use without acceptance testing.
Micro-inverters convert the electricity of your solar modules into usable electricity. Single-phase micro-inverters are usually used in residential and small commercial environments (supports single-phase or three-phase connection)
We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring of the fire, zero and ground wires. Meanwhile, the DC input is equipped with an MC4 connector to avoid swapping the positive and negative connectors. (Some customers extend the solar panel cable so that the positive and negative polarity are reversed.)
Grid Tie Inverter can monitor the power generated by the inverter in real time via the AC digital meter. (Voltage, current, active power, electrical energy, frequency, power factor) No fire hazard and no electric shock during installation and operation due to low DC voltage (up to 50 V) compared to at least 200 V of string inverters
Grid Tie Solar Inverter suitable for 2X250W-300W 36V solar panel (Vmp30-39V; Voc36-50V) Vmp = operating voltage; Voc = open circuit voltage. Optimized for high-performance modules with 60 and 72 cells *. Each MC4 branch shall not exceed 300 W
Stackable connection; high precision phase detection; over and under voltage protection; over and under frequency protection; island formation protection. Almost no maintenance is required, occasionally remove the dust on the photovoltaic module.
WVC series inverter With waterproof streamlined IP65 design that effectively prevents rainwater on surface erosion, built-in MPPT function to track maximum power point with high power, better able to track changes in solar brightness and control different output powers, effectively capture and collect sunlight AC electrical energy transmission using reverse transmission technology. The output power of the inverter can provide load priority, extra power to the grid and efficiently convert sunlight into clean and green electricity.
Features:
1.IP65 waterproof design (installed at the bottom of the solar panel)
2. AC data monitoring screen.
3. Built-in high-performance maximum power point tracking function (MPPT)
4. Suitable for 2X250W-300W 36V solar panel (Vmp30-39V; Voc36-50V)
5. Aluminum alloy material. Better heat dissipation.
6. Support single-phase or three-phase connection.
7. Simple wiring.
8. High-precision phase detection; over-and under-voltage protection; over-and under-frequency protection; island protection.
Parameters:
Model: WVC-600W
Rated voltage: 220 V
PV recommend: 2*250 ~ 300W
Recommended PV (Voc): 34 ~ 50 V DC
MPPT tracking voltage: 28 ~ 40 V DC
Maximum Input Current: 26A
Rated output current: 2.39 A
Maximum units per branch: 10 PIECES
Frequency: Automatic switch 50/60Hz
Ambient temperature:-40 ℃to + 65?
Dimensions: 283 mm × 200 mm × 41.6mm
Weight: 1.56 kg
Cooling: Self-cooling
Certificate: CE
User Note:
• Vmp (a solar panel) must be within the MPPT tracking range to ensure good output efficiency
• ONLY use a solar panel connected to this device.
• This device is an ON-GRID micro inverter. In order for it to work properly, it must be correctly connected to the mains and the mains must work properly. When the power grid stops working, it also stops generating.
• DO NOT exceed the voltage of the PV modules above the maximum input voltage of the Solar Grid Tie Inverter. (Vmp>28V;Voc<50V)
• DO NOT exceed the power of the PV modules above the maximum input power of the grid-tie solar inverter. (2X300W)
• The positive and negative poles of the solar panel cannot be reversed. If you extend the cable of the solar panel. You need to be careful with this problem.
• Install protected from direct sunlight and direct rain (ventilated, dry, cool).
On the inverter heating problem:
This is a normal phenomenon. All electronic devices generate heat during operation. The inverter uses aluminum alloy material. Metal can conduct heat better. The inverter also has over-temperature protection when the temperature is too high. Then the inverter automatically reduces the working power efficiency. Or stop working. After cooling, restart. It is recommended to install the inverter in a ventilated, dry and cool place.
About inverter repair:
After a large amount of customer data feedback, the inverter cannot work because the DC or AC fuse is damaged. (The red light is on because the AC accessories are damaged, and when the light is off, the DC accessories are damaged.) If this problem occurs, we can send you accessories for free. And give you maintenance video instructions. You can easily replace it.
If you have any questions after receiving the product, please contact us in time. We will provide you with good customer service, so you do not have to open disputes at will.