Stable signal output, high-precision and fast measurement.
Product Description
|
Product Name
|
Soil Oxygen Sensor
|
|
Measurement parameters
|
Oxygen concentration
|
|
Measuring range
|
0～25%VOL
|
|
Measurement accuracy
|
±2%F•S （25℃）
|
|
Measurement resolution
|
0.1%VOL
|
|
Response time
|
＜15s
|
|
Outputsignal
|
A:RS485 (standard Modbus-RTU protocol)
|
|
|
B:4 to 20 mA (current loop)
|
|
|
C:0~5V /0~10V
|
|
Supply voltage
|
7～24V （RS485/0～2V)
12～24V （ 0～5V/ 0～10V/ 4～20mA)
|
|
Average current
|
≤15mA
|
|
Working temperature range
|
－20℃～50℃
|
|
Working humidity
|
15～80%RH (No condensation)
|
|
Output signal with wireless
|
A:LORA/LORAWAN
|
|
|
B:GPRS
|
|
|
C:4G
|
|
|
D:WIFI
|
|
Material
|
ABS engineering plastic, epoxy resin
|
|
Software
|
Can send the matched server and software to see the real time data and download the history data in the PC or mobile end with our wireless module
|
|
Cable specification
|
Standard 2 meters (can be customized for other cable lengths, upto 1200 meters)
|
Details Images
1
. Soil Oxygen Sensor
The oxygen content of the soil is based on electrochemical sensors and high-performance microprocessors, with a built-in temperature sensor for temperature compensation, which can accurately measure the oxygen concentration in the environment.
2. Excellent linear output
3.Small size and can be burried in different soil layers to measure oxygen content
Moisture-proof, anti-corrosion and breathable design, which can measure the oxygen content of the soil at different depths online all year round
Five-star good product evaluation
Product Usage
Soil Surface measure method
Please note the soil oxygen sensor can be moisture-proof but cannot be water-proof, so need burry in the soil at least 10-20cm
deep(according to the site condition) to avoid immersion of the sensor probe in water.
deep(according to the site condition) to avoid immersion of the sensor probe in water.
Buried measure method
1. Make a soil profile in the vertical direction, slightly deeper than the installation depth of the bottommost sensor, between 20cm and 50cm in diameter
2. Insert the sensor horizontally into the soil profile
3. After the installation is completed, the excavated soil is backfilled in order, layered and compacted, and horizontal installation is guaranteed.
4. If you have the conditions, you can put the removed soil in a bag and number it to keep the soil moisture unchanged, and backfill it in reverse order.
2. Insert the sensor horizontally into the soil profile
3. After the installation is completed, the excavated soil is backfilled in order, layered and compacted, and horizontal installation is guaranteed.
4. If you have the conditions, you can put the removed soil in a bag and number it to keep the soil moisture unchanged, and backfill it in reverse order.
