This RFID card reader needs to work with Wiegand 26/ 34 protocol door access controller, such as control board, fingerprint device or standalone system, it can't work alone.c.
Note:
- It is not standalone reader, it must work with Wiegand door access control board
- It is ID card reader, not support writing
- No manual, please connect wire to controller and set up via controller
Packing List (bulk pack):
Specifications:
- Protocol: Wiegand 26/ 34
- Reading speed: <0.2s
- Reading interval: <0.5s
- Sensor distance: 5-15cm
- Support card: ID/ EM
- Frequency: 125KHz
- Working voltage: DC5-16V
- Working current: 70mA
- Working temperature: -25 to 75 degree C
- Humidity: 10-90%
- LED color: Blue/ Green
- Speaker: Internal
- Size: 102 x 43 x 16mm (4.02 x 1.69 x 0.63 inch)
- Weight: 78g (0.17 lb)