BUNPIG Clear Water Window Film

BUNPIG Frosted Window Film is designed to give a beautiful appearance of modern appearance to your windows and doors, whether for privacy, to block out an unsightly view or for decorative purposes. Besides prevent UV rays, it can also cut out a large proportion of the unwanted glare, whilst still allowing natural light to pass through. It will work on any smooth glass surface and can be used anywhere in the home, requires no additional cleaning and can be installed at a fraction of the cost.

SPECIFICATIONS:

Type: 2D Window Film Material: Vinyl + PVC Environmental: Through Europe EN71-3 standard and SGS Thickness: 0.214 mm (excluding the backing film) Average life: 3 years Package Content: 1 roll of Window Film and 1 Piece of Installation Guide

HOW TO INSTALL THE BUNPIG WINDOW FILM?

3 TIPS BEFORE YOU START: A small utility knife with breakaway blades is the best tool for trimming film. Film can dull a blade edge quickly; and a dull blade can tear film. Fill a spray bottle with a soapy water solution: to 1qt. bottled water, add 1/4 tsp of liquid soap. Avoid using concentrated or degreasing detergents. If you can't find proper liquid soap, the clean water is also OK for the solution. Remove any caulk, paint or glue debris that may be stuck to the window.

8 STEPS OF THE INSTALLATION:

Measure and record the dimensions the target glass. Clean the glass thoroughly. Add 1+ inch on every side when cutting the film so you have excess film to trim away. Peel off the backing liner. Generously spray the soapy water both on the glass and the window film. Place the film on the wet glass, adjust the position of the window film. Using a plastic squeegee or card, begin squeegeeing the water and air out from under the film. Trim excess material away with a VERY sharp razor or craft knife, leaving a 1/16" wide gap around the edges of the film.

Frequently Asked Questions:

1. How to deal with the air bubbles? Use a hard plastique squeegee or any plastic card to squeegee air bubbles and water. If you find it's hard to get rid of the bubbles, uncover the window film, spray more water between the glass and the film and squeegee firmly again. Water will make it much easier to remove bubbles. 2. Why the film fall off after a while? Please check if you have removed the liner, trimmed the edges or squeegeed excess water and bubbles. Leave a 1/16" wide gap around the four perimeter edges of the film. This gap is essential for the proper thermal expansion of the glass and allows you to completely squeegee the water and air from under the film.The blade or the knife for cutting the film is not sharp, resulting in deformation at the edge of the film. NOTE: Film can dull a blade edge quickly; and a dull blade can tear film. 3. Can I remove the film at a later stage? Absolutely. Our blackout film is removable and reusable. You can just simply peel the film off the glass in seconds with no mess. 4. How to peel off the backing liner? All static cling films have a liner, but some are clear and hard to see at first glance. If you can't separate the liner from the film, place a piece of scotch tape on both sides of the sheet, fold the tape over to create tabs, and use the tabs to separate the two sides.

 

Paying tax is the duty of every citizen, buyer need to responsible for the all of taxes. Due to the tax problem, buyer refuse to receive the goods, buyer need to Responsible for freight out and home.

1.   Delivery time: We send by China Post Air Mail in Default.  (20-60 days for different cournties, Brazil sometimes needs 90days). We send by Epacket to USA about 7-15 days.

2.   For fast delivery, please choose EMS (7-10 days), for Russia and Brazil, it needs 10-15 work days.

3.   We guarantee to ship out within 15days after payment confirmation (except Holiday).

4. Our shipping rates include the cost of shipping, handling, packaging and related manpower costs.

5. Please contact us If you don't receive over above business days,we will solve this problem in a very short time.

6. Please make sure the shipping address is correct. We are not responsible for any wrong or undeliverable addresses.

1.We depend on our aliexpress reputation and customer satisfaction to succeed. Therefore, Your feedback and DSRS are extremely important to us as better DSR scores affect our search; placement on aliexpress.

2.If you love my items please leave me good feedback and 5 star DSR rating. Your action will help us offer our milk and bread . I will do the same for you .If we have not given you reason enough for 5-star grades on each DSR then please let us know how we can earn your 5-star rating before submitting your stores!

1. We will check the goods quality before shipment. If there are some unexpected problems happen, we hope to solve the problems with buyer through friendly in the following ways:
   (1) If it is quality problem, buyer can contact us after receiving the goods, buyer can help to provide photos or video and other evidence to help us to solve the problems.
   (2) Man-made damaged, buyers take full responsibility.
   (3) If the cusomers do not satisfy with the products, the buyer return the goods in original conditon to us; after we receive the goods ,we will send a new product to buyer or refund the money. But shipping fee is not refundable.

And the item should be returned to us in its original condition by mail with tracking number.

4.   Any question you would like to ask ,welcome to email us

All emails will be answered within 24 hours. If you do not receive our reply, please kindly re-sent your email and we will reply you as soon as possible. If you email us and don't hear a reply, please email again through the aliexpress system as sometimes our mail servers have errors

Because of the new rule of Russia post office, When make an order, Russia customers have to write the Full name(a surname, a name and a middle name), or the packages would be sent back . No full name, we will refuse to send goods out! thanks!

Thank you for your coming to our shop!!!

PushAuction