SHURE - ULXD4E H51 - Récepteur Simple Bande
ULXD4E H51
Livraison: Sous 2 jours ouvrés
Garantie: 2 ans pièces & main-d'oeuvre
En Savoir Plus :
SHURE - ULXD4E H51 - Récepteur Simple Bande
Dotée d’une technologie de transmission sans fil numérique très robuste, la gamme ULX-D Shure offre des performances audio et HF exceptionnelles ainsi qu’un ensemble de fonctionnalités innovantes. Les systèmes ULX-D sont proposés avec récepteurs simple, double ou quad. La gamme se voit aussi dotée d'un émetteur micro de surface avec directivité omnidirectionnelle ou cardioïde, et d'un émetteur socle de table compatible avec les cols de cygne modulaires Microflex. La gamme de système sans fil numérique ULX-D se destine aux prestations et aux installations fixes les plus exigeantes.
Les points forts du système ULX-D :
Audio numérique
Le traitement audio numérique en 24 bits / 48 kHz assure, grâce à une réponse en fréquences de 20 Hz à 20 kHz et une dynamique supérieure à 120 dB, une reproduction incroyablement fidèle et précise des sources sonores.
Performance HF
La stabilité du signal HF et l’exceptionnelle efficacité spectrale de la gamme ULX-D permettent d’utiliser jusqu’à 560 fréquences compatibles sur une bande de fréquences en mode Haute Densité.
Cryptage du signal
Le cryptage du signal sur 256 bits garantit la protection de la vie privée – pour toutes les installations où la confidentialité est essentielle.
Contrôle en réseau
La mise en réseau Ethernet de plusieurs récepteurs permet l’utilisation du logiciel Wireless Workbench 6, d’assurer la coordination des fréquences via le Manageur de spectre Axient, de contrôler les systèmes avec un automate externe, et de bénéficier du réseau audio numérique Dante™ (sauf récepteur simple). Possibilité de surveillance et de contrôle à distance à partir d'un appareil iOS ou Android avec l'application ShurePlus™ Channel.
Energie
Les émetteurs ULX-D peuvent être alimentés soit par deux piles LR6, soit par un accu rechargeable Ion-Lithium SB900 Shure permettant l’affichage du temps restant en heures et minutes avec une précision de +/-15 minutes.
La série ULX-D est disponible en VHF et UHF dans les bandes de fréquences V51 (174-216 MHz), G51 (470-534 MHz), H51 (534-598MHz) et K51 (606-670 MHz).
Récepteur numérique en boîtier métal au format ½ rack 19", doté d'une alimentation externe. Il est muni d’un afficheur LCD rétro éclairé et intègre une gestion par menus intuitifs. Il est livré avec le montage en rack simple et double, le kit de report des antennes en façade, un câble Ethernet de 90 cm et deux antennes ½ onde.
Caractéristiques :
- Jusqu’à 72 MHz de bande passante HF
- Jusqu’à 70 systèmes en simultané par bande en mode standard
- Jusqu’à 560 systèmes en simultané par bande en mode haute densité
- Scanner de fréquences rapide
- Détection d’interférences et alertes
- Synchronisation des émetteurs par liaison IR
- Réponse en fréquence audio : 20 Hz à 20 kHz
- Convertisseurs A/N et N/A 24 bits – 48 kHz
- Latence : 2,9 ms
- Gestion par PC ou Mac avec le logiciel Wireless Workbench 6
- Surveillance à distance avec l'application iOS ShurePlus™ Channel
- Compatible avec la TNT et la 4G Bandes de fréquences disponibles G51 : 470 à 534 MHz H51 : 534 à 598 MHz K51 : 606 à 670 MHz Caractéristiques du récepteur simple
- Diversity prédictif numérique
- Gain de 60 dB réglable en façade
- Bargraph Audio et RF à LED avec indicateur de crête
- Témoin d’activation de la clé de cryptage
- Sorties audio : XLR niveau micro/ligne et Jack 6,35mm symétrique
- Entrées RF : BNC avec alimentation pour antenne active
- Connecteur RJ45 : 1 port Ethernet 10 / 100 Mbps
- Alimentation externe 240V AC – 15V DC
SHURE - ULXD4E H51 - Single Band Receiver
ULXD4E H51
1 189,00 €
Processing time: Under 2 working days
Guaranty: 2 years by manufacturer
More info
SHURE - ULXD4E H51 - Single Band Receiver
Featuring highly robust digital wireless transmission technology, Shure's ULX-D range offers outstanding audio and HF performance and a host of innovative features. ULX-D systems are available with single, dual or quad receivers. The range also features a surface-microphone transmitter with omnidirectional or cardioid polar patterns, and a table-top transmitter compatible with Microflex modular goosenecks. The ULX-D range of digital wireless systems is designed for the most demanding services and fixed installations.
ULX-D system highlights :
Digital audio
24-bit / 48 kHz digital audio processing with a frequency response of 20 Hz to 20 kHz and a dynamic range in excess of 120 dB ensures incredibly faithful, precise reproduction of sound sources.
HF performance
The ULX-D range's HF signal stability and exceptional spectral efficiency mean that up to 560 compatible frequencies can be used in one frequency band in High Density mode.
Signal encryption
256-bit signal encryption guarantees privacy - for all installations where confidentiality is essential.
Networked control
Ethernet networking of multiple receivers enables use of Wireless Workbench 6 software, frequency coordination via Axient Spectrum Manager, system control with an external PLC, and Dante™ digital audio networking (except single receiver). Remote monitoring and control possible from an iOS or Android device with the ShurePlus™ Channel app.
Energy
ULX-D transmitters can be powered either by two LR6 batteries, or by a Shure SB900 rechargeable Ion-Lithium battery allowing the display of remaining time in hours and minutes with an accuracy of +/-15 minutes.
The ULX-D series is available in VHF and UHF in the V51 (174-216 MHz), G51 (470-534 MHz), H51 (534-598MHz) and K51 (606-670 MHz) frequency bands.
Digital receiver in ½ rack 19" metal housing, featuring external power supply. It features a backlit LCD display and integrated intuitive menu-driven management. It comes complete with single and double rack mounting, front-panel antenna transfer kit, 90 cm Ethernet cable and two ½ wave antennas.
Features:
- Up to 72 MHz HF bandwidth
- Up to 70 simultaneous systems per band in standard mode
- Up to 560 simultaneous systems per band in high-density mode
- Fast frequency scanning
- Interference detection and alerts
- Transmitter synchronization via IR link
- Audio frequency response: 20 Hz to 20 kHz
- 24-bit - 48 kHz A/D and D/A converters
- Latency: 2.9 ms
- Management via PC or Mac with Wireless Workbench 6 software
- Remote monitoring with the ShurePlus™ Channel iOS app
- Compatible with DTT and 4G Available frequency bands G51: 470 to 534 MHz H51: 534 to 598 MHz K51: 606 to 670 MHz Single receiver features
- Digital predictive diversity
- 60 dB front-panel adjustable gain
- Audio and RF LED bar graph with peak indicator
- Encryption key activation indicator
- Audio outputs: XLR mic/line level and balanced 6.35mm jack
- RF inputs: BNC with power supply for active antenna
- RJ45 connector: 1 x 10/100 Mbps Ethernet port
- External power supply 240V AC - 15V DC
SHURE - ULXD4E H51 - Single Band Receiver
ULXD4E H51
1 189,00 €
Processing time: Under 2 working days
Guaranty: 2 years by manufacturer
Más
SHURE - ULXD4E H51 - Single Band Receiver
Featuring highly robust digital wireless transmission technology, Shure's ULX-D range offers outstanding audio and HF performance and a host of innovative features. ULX-D systems are available with single, dual or quad receivers. The range also features a surface-microphone transmitter with omnidirectional or cardioid polar patterns, and a table-top transmitter compatible with Microflex modular goosenecks. The ULX-D range of digital wireless systems is designed for the most demanding services and fixed installations.
ULX-D system highlights :
Digital audio
24-bit / 48 kHz digital audio processing with a frequency response of 20 Hz to 20 kHz and a dynamic range in excess of 120 dB ensures incredibly faithful, precise reproduction of sound sources.
HF performance
The ULX-D range's HF signal stability and exceptional spectral efficiency mean that up to 560 compatible frequencies can be used in one frequency band in High Density mode.
Signal encryption
256-bit signal encryption guarantees privacy - for all installations where confidentiality is essential.
Networked control
Ethernet networking of multiple receivers enables use of Wireless Workbench 6 software, frequency coordination via Axient Spectrum Manager, system control with an external PLC, and Dante™ digital audio networking (except single receiver). Remote monitoring and control possible from an iOS or Android device with the ShurePlus™ Channel app.
Energy
ULX-D transmitters can be powered either by two LR6 batteries, or by a Shure SB900 rechargeable Ion-Lithium battery allowing the display of remaining time in hours and minutes with an accuracy of +/-15 minutes.
The ULX-D series is available in VHF and UHF in the V51 (174-216 MHz), G51 (470-534 MHz), H51 (534-598MHz) and K51 (606-670 MHz) frequency bands.
Digital receiver in ½ rack 19" metal housing, featuring external power supply. It features a backlit LCD display and integrated intuitive menu-driven management. It comes complete with single and double rack mounting, front-panel antenna transfer kit, 90 cm Ethernet cable and two ½ wave antennas.
Features:
- Up to 72 MHz HF bandwidth
- Up to 70 simultaneous systems per band in standard mode
- Up to 560 simultaneous systems per band in high-density mode
- Fast frequency scanning
- Interference detection and alerts
- Transmitter synchronization via IR link
- Audio frequency response: 20 Hz to 20 kHz
- 24-bit - 48 kHz A/D and D/A converters
- Latency: 2.9 ms
- Management via PC or Mac with Wireless Workbench 6 software
- Remote monitoring with the ShurePlus™ Channel iOS app
- Compatible with DTT and 4G Available frequency bands G51: 470 to 534 MHz H51: 534 to 598 MHz K51: 606 to 670 MHz Single receiver features
- Digital predictive diversity
- 60 dB front-panel adjustable gain
- Audio and RF LED bar graph with peak indicator
- Encryption key activation indicator
- Audio outputs: XLR mic/line level and balanced 6.35mm jack
- RF inputs: BNC with power supply for active antenna
- RJ45 connector: 1 x 10/100 Mbps Ethernet port
- External power supply 240V AC - 15V DC
SHURE - ULXD4E H51 - Single Band Receiver
ULXD4E H51
1 189,00 €
Processing time: Under 2 working days
Guaranty: 2 years by manufacturer
Produktinfos
SHURE - ULXD4E H51 - Single Band Receiver
Featuring highly robust digital wireless transmission technology, Shure's ULX-D range offers outstanding audio and HF performance and a host of innovative features. ULX-D systems are available with single, dual or quad receivers. The range also features a surface-microphone transmitter with omnidirectional or cardioid polar patterns, and a table-top transmitter compatible with Microflex modular goosenecks. The ULX-D range of digital wireless systems is designed for the most demanding services and fixed installations.
ULX-D system highlights :
Digital audio
24-bit / 48 kHz digital audio processing with a frequency response of 20 Hz to 20 kHz and a dynamic range in excess of 120 dB ensures incredibly faithful, precise reproduction of sound sources.
HF performance
The ULX-D range's HF signal stability and exceptional spectral efficiency mean that up to 560 compatible frequencies can be used in one frequency band in High Density mode.
Signal encryption
256-bit signal encryption guarantees privacy - for all installations where confidentiality is essential.
Networked control
Ethernet networking of multiple receivers enables use of Wireless Workbench 6 software, frequency coordination via Axient Spectrum Manager, system control with an external PLC, and Dante™ digital audio networking (except single receiver). Remote monitoring and control possible from an iOS or Android device with the ShurePlus™ Channel app.
Energy
ULX-D transmitters can be powered either by two LR6 batteries, or by a Shure SB900 rechargeable Ion-Lithium battery allowing the display of remaining time in hours and minutes with an accuracy of +/-15 minutes.
The ULX-D series is available in VHF and UHF in the V51 (174-216 MHz), G51 (470-534 MHz), H51 (534-598MHz) and K51 (606-670 MHz) frequency bands.
Digital receiver in ½ rack 19" metal housing, featuring external power supply. It features a backlit LCD display and integrated intuitive menu-driven management. It comes complete with single and double rack mounting, front-panel antenna transfer kit, 90 cm Ethernet cable and two ½ wave antennas.
Features:
- Up to 72 MHz HF bandwidth
- Up to 70 simultaneous systems per band in standard mode
- Up to 560 simultaneous systems per band in high-density mode
- Fast frequency scanning
- Interference detection and alerts
- Transmitter synchronization via IR link
- Audio frequency response: 20 Hz to 20 kHz
- 24-bit - 48 kHz A/D and D/A converters
- Latency: 2.9 ms
- Management via PC or Mac with Wireless Workbench 6 software
- Remote monitoring with the ShurePlus™ Channel iOS app
- Compatible with DTT and 4G Available frequency bands G51: 470 to 534 MHz H51: 534 to 598 MHz K51: 606 to 670 MHz Single receiver features
- Digital predictive diversity
- 60 dB front-panel adjustable gain
- Audio and RF LED bar graph with peak indicator
- Encryption key activation indicator
- Audio outputs: XLR mic/line level and balanced 6.35mm jack
- RF inputs: BNC with power supply for active antenna
- RJ45 connector: 1 x 10/100 Mbps Ethernet port
- External power supply 240V AC - 15V DC
SHURE - ULXD4E H51 - Single Band Receiver
ULXD4E H51
1 189,00 €
Processing time: Under 2 working days
Guaranty: 2 years by manufacturer
Dettagli
SHURE - ULXD4E H51 - Single Band Receiver
Featuring highly robust digital wireless transmission technology, Shure's ULX-D range offers outstanding audio and HF performance and a host of innovative features. ULX-D systems are available with single, dual or quad receivers. The range also features a surface-microphone transmitter with omnidirectional or cardioid polar patterns, and a table-top transmitter compatible with Microflex modular goosenecks. The ULX-D range of digital wireless systems is designed for the most demanding services and fixed installations.
ULX-D system highlights :
Digital audio
24-bit / 48 kHz digital audio processing with a frequency response of 20 Hz to 20 kHz and a dynamic range in excess of 120 dB ensures incredibly faithful, precise reproduction of sound sources.
HF performance
The ULX-D range's HF signal stability and exceptional spectral efficiency mean that up to 560 compatible frequencies can be used in one frequency band in High Density mode.
Signal encryption
256-bit signal encryption guarantees privacy - for all installations where confidentiality is essential.
Networked control
Ethernet networking of multiple receivers enables use of Wireless Workbench 6 software, frequency coordination via Axient Spectrum Manager, system control with an external PLC, and Dante™ digital audio networking (except single receiver). Remote monitoring and control possible from an iOS or Android device with the ShurePlus™ Channel app.
Energy
ULX-D transmitters can be powered either by two LR6 batteries, or by a Shure SB900 rechargeable Ion-Lithium battery allowing the display of remaining time in hours and minutes with an accuracy of +/-15 minutes.
The ULX-D series is available in VHF and UHF in the V51 (174-216 MHz), G51 (470-534 MHz), H51 (534-598MHz) and K51 (606-670 MHz) frequency bands.
Digital receiver in ½ rack 19" metal housing, featuring external power supply. It features a backlit LCD display and integrated intuitive menu-driven management. It comes complete with single and double rack mounting, front-panel antenna transfer kit, 90 cm Ethernet cable and two ½ wave antennas.
Features:
- Up to 72 MHz HF bandwidth
- Up to 70 simultaneous systems per band in standard mode
- Up to 560 simultaneous systems per band in high-density mode
- Fast frequency scanning
- Interference detection and alerts
- Transmitter synchronization via IR link
- Audio frequency response: 20 Hz to 20 kHz
- 24-bit - 48 kHz A/D and D/A converters
- Latency: 2.9 ms
- Management via PC or Mac with Wireless Workbench 6 software
- Remote monitoring with the ShurePlus™ Channel iOS app
- Compatible with DTT and 4G Available frequency bands G51: 470 to 534 MHz H51: 534 to 598 MHz K51: 606 to 670 MHz Single receiver features
- Digital predictive diversity
- 60 dB front-panel adjustable gain
- Audio and RF LED bar graph with peak indicator
- Encryption key activation indicator
- Audio outputs: XLR mic/line level and balanced 6.35mm jack
- RF inputs: BNC with power supply for active antenna
- RJ45 connector: 1 x 10/100 Mbps Ethernet port
- External power supply 240V AC - 15V DC
