Description

Communication is the best way to solve the problem. 

If you have any problems after purchasing, please contact us in time, before opening return or case. Thank you for your support and understanding.

Specifications:

Brand: Alpha Rider

Conditions: Brand New

Type: Wide & Narrow Slot Check Valve Removal Kit

Material: 316 Stainless Steel, High quality and durable

Model: Lantern Stove Tools Parts

Nut Size: 1/4 -32 

Color: as pictures shown

Qty: 3 pcs/set

Warranty: 1 Year

Fitments:

Wide & Narrow Slot Check Valve Removal Kit

Rod fits both 1/4-32 and 8/32 check valve stems

Nut is 1/4 -32

Fits most liquid fuel lanterns and camp stoves

Works on older and newer style wide and narrow slot check valves. 

Probably will not work with 242nl or early 242A without the air stem unless held into check valve 220b on up.  

Use wrench on hex end of removal tool to remove valve. 

Note:

To complete the pressing until the bolt slot is in place before loosening or tightening, 

if it is not fully pressed into the bolt slot, it is easy to damage the tool.

Package Included:

3 pcs/set of Wide & Narrow Slot Check Valve Removal

Detail:

1.Remove the air stem from your lantern's check valve in order to determine which of the two threaded rods to use  (8-32 or ¼-32 thread)

2. Hand screw the rod into the check valve at least finger tight. Engage as much thread as possible.

3. Slide the tool down over the rod.

4. Make sure that the ears are fully engaged in the slot.Gently turn the tool until the ears drop into the slots cut in the check valve.

5. Drop a washer onto the rod and then screw on one of the 7/16” nuts (1/4-20 thread) and tighten just enough to eliminate any play in the tool and lock it into place. Caution: Do not over tighten as the brass threads in the check valve may strip!

6. Using adjustable wrench, fit it to the flats on the exposed end of the tube.

7. Hold the fount in a solid grip. If you have a vise, this is a great application for it. Give the wrench a solid turn counterclockwise. Do not side load the wrench. The check valve will loosen and you will be able to remove the entire assembly with the check valve attached.

8. Clean and loosen the ball bearing in the check valve and when free, screw the check valve back into the fount, or use a new replacement valve. 

9. As Always, Check for Leaks. Place empty Font, Lightly Pressurized with air, submerged in water. Look for air bubbles. Or use A Font Pressure Gage. 

10.Be careful not to reinstall the valve too tight!

11.It's also a good idea to lightly coat the tool with oil as it can rust in a damp environment.

NOTE:

1.Due to the light and screen difference, the item's color may be slightly different from the pictures.

2.All dimensions are measured by hand, there may be small deviations.

3.This Is Aftermarket Replacement Item.

4.Please check your correct replacement parts before purchase, the picture show more detail, thank you.

* Please follow ebay's order payment procedure and comfirm the order for the preparation of quick shipment.

* We can accept payment method is PayPal, Google Pay, Visa, Master Card, Amex and Discover.

* Please read the item description and check the pictures carefully before order.

* Return or refund is available only if item DOA or there's error in item description causing the item not fitting the need. In such cases, seller pays for all related shipping cost.

* Returns are also acceptable if buyer purchased this by mistake and item is still in good condition for reselling. Buyer is responsible for all related shipping cost.

* Buyer need to file an application for return within 30 days after receiving the item. Items returned must be still in good condition as  they were received.