Easy Installation
The double-sided stickers on the back allow you to easily paste this alarm kit onto any smooth surface.

Note:
The 2 parts need be aligned by their alignment arrow.
The Distance between them should be less than 10 mm.

Multi-purpose
Suitable for various types of doors windows (sliding/crank/hung....doors and windows ), cabinets, and drawers...
Real-time State Protection
Immediately alarm while thief pushing the door or window. Response in 200ms.
 
Triggered immediately
Alarm will be triggered immediately once you separate two parts.110 db loud alarm helps deter intruder and possibly notifies neighbors/homeowner, also helps notify you if visitors/children/pet or others are coming/going when you are at home.
 
 
 
 
 
 
 
Technical Specifications:
 
(Alarm)
Volume:110dB
Color:White
Weight:2.29oz/65g
Material:ABS
Power Supply:2 x AAA Batteries (not included)
Response Time:200ms
Standby Time:12 Months
Dimensions:85(L) x 43(W) x 15(H) mm
 
 
(Remote)
Voltage:12V 27A
Standby Current:1μA
Working Current:15mA
Standby Time:
12 Months
Control Range:20m
Power Supply:1 x 27A Battery (included)
Dimensions:61(L) x 30(W) x 13(H) mm
 
 
Paketliste:
1 x Magnetic Sensor
1 x Magnetic Stick
1 x Remote Control
1 x User Manual
 
 
 
 
 
Installation Instruction
Where to install?
It can be mounted to windows or doors with included
double sides adhesive tape easily, no tools required
 
 
 
 
 
 How it works
When in arm mode, if detected doors or windows are opened, the alarm will recurrently alarm 30 seconds and stop 15 seconds until doors or window are closed or disarm by the remote.
When in disarm mode, the alarm has no function except for panic and low battery indicate.
When in doorbell mode, if doors or windows are opened, the alarm will sound "dingdong" to remind you.
 
How to pair alarms with your remote?
Change to disarm mode by the remote.
Put one battery into the alarm need be paired at first.
When put the other one into the alarm need be paired, press and hold the doorbell button of the remote.
After you hear a "Bi...", press arm button once.
Then the alarm will sound two "Bi... Bi...".
It is well done.
 
How to pair remotes with your alarm?
Change to disarm mode by a paired remote.
Take out two batteries of the alarm.
Put one battery into the alarm at first.
When put the other one into it, press and hold the doorbell button of the remote need be paired.
After you hear a "Bi...", press arm button once.
Then the alarm will sound two "Bi... Bi...".
It is well done.
Note: One alarm can only be paired with at most 8 remotes.
 
 

 

Am 21.05.21 hat der Verkäufer die folgenden Angaben hinzugefügt:

 

DataCaciques
PushAuction

On 18/02/2024 at 16:50:01 AEDT, seller added the following information:

DataCaciques