Genuine Replacement AI Lens for AI Prime, AI Hydra & Fuge Fresh and Saltwater.
This is a replacement lens Aqua Illumination lighting. These will sometimes need replacing as they can get burnt and discoloured, making your light less efficient.
This lens will fit the AI Prime 16HD, Hydra 32HD and Hydra 64HD, for both Fresh and Saltwater.
Please Note: These will not fit the older style Hydra 26/26HD or 52/52HD models.
The orientation of the light / lens is really important, if installed 90 degrees out of rotation the LED's will be damaged.
1. Remove the 4 x case screws (peel back the label on 16 carefully to reveal 4th screw, or 5 x screws on 64 units)
2. Gently lift the case while pushing down on the black cable grommet that goes into the case to release it, this will allow the top case to be removed fully.
3. Remove the screws from the optics.
4. Remove the optics.
5. Seat the optics making sure that you orientate them correctly, this is most important as the red, green, UV and Violet lenses are different lengths on the back of the optic so will foul the LED’s and damage them if the lens is orientated incorrectly, please see images attached showing the part no on the lens and how that number should be orientated when installing the optic. For 16 the part number should be at 12 or 6 o’clock looking at the Prime face on with the DC cable at the top of the case, take note of the part number position before removing the old lens if uncertain.
All orders are sent out via Tracked Courier Service from our UK Warehouse - Tracking will be supplied through eBay once your order has shipped. All orders are sent out within 24 hours (Mon-Fri, excluding bank holidays).
Urmston Aquatics and Reptile Centre