Description:
l Mode 2: single motor, rudder turn
l Mode 3: Dual motor, Differential turn
l Remote control: for dual motor differential model, remote control boat, aircraft, tank
l 2.4G signal, the remote control handle comes with a lithium battery
l The remote control effective range is more than 400 meters
l You can cruise at a fixed speed, push the throttle to the desired position, press the E button on the back, release the button, the throttle locks, and the boat will automatically fix the throttle and sail. You can press the C and D keys to add or subtract throttle, or push the throttle to accelerate. Press E again to unlock and return to throttle control
l The receiver can be connected to 2 ESCs and 4 steering engines
l The 2 motors are differential turn. The 4 steering engines are left/right button controls
l No. 1 and No. 2 steering engine control buttons, press, the steering engine is rotated 90 degrees, the button is released, and the steering gear comes back
l No. 3 and No. 4 steering engine control buttons, press, the steering engine is rotated 90 degrees, and release the steering engine and keep 90 degrees. Press the button again to return the steering engine
l Receiver connection method: 1 and 2 channels Connect 2 ESCs. 3 4 5 6 channels Connect 4 steering engines
Mode adjustment process:
turn on the power, press and hold the A button, then press the E button. Release the 2 keys. After the light flashes quickly, press B to select mode 2. For mode 3, press C to select mode 3. After setting, shut down and restart
Button description:
the following four small buttons 1234 correspond to ABCD. The top two are AB, the lower two are CD. The single one on the back is the E key
Steering angle setting:
Hold down the C key first, then press and hold the E key. At this time, after the transmitter sealer is ringing, the power light flashes to indicate entering of the steering angle setting. The setting data will be automatically saved after the setting is completed and power off
1: Press the A button to change the CH1 steering angle (10 angles selection, minimum 10, max 100 degrees)
2: Press the B button to change the CH2 steering angle (10 angles selection, minimum 10, max 100 degrees)
3: Press the C button to change the CH3 steering angle (10 angles selection, minimum 10, max 100 degrees)
4: Press the D button to change the CH4 steering angle (10 angles selection, minimum 10, max 100 degrees)
It is most appropriate to install a steering gear dispenser with a 40 degree angle. Will not lock the steering engine
For the code process:
first, the receiver plugs in and the power is turned on, the receiver starts to flash, then press and hold the code switch on the back of the handle, press and hold. Turn on the power switch of the remote control handle. Hold for 3 seconds. It will automatically change the frequency, if the receiver does not flash, it is already right
Remote control:
Length: 15cm, Width: 5.3cm, Height: 5.5cm
Weight: 80g
Remote control range: 400 meters
Receiver:
Length 3.75cm, Width 2cm
Antenna length: 16cm
Receiver connection: 1 and 2 are connected to the ESC, 3 and 4 are connected to the steering engine line plug with the chip side facing up. The signal line is inserted in the first row of pins, and the BEC's ESC is required, otherwise it is useless.
Note: The antenna exposes the enhanced signal outside the ship, and the receiver can only connect the steering engines below 6kg.
When the receiver is installed, the antenna needs to be upright, fixed in the hull, and cannot be shaken. It is convenient for the gyroscope to automatically repair the yaw
Packing includes:
l 1 * handle emitter + receiver
Or:
l 1 * handle emitter/ receiver