Toughness Enhanced PLA Filaments--- Premium PLA filaments have the advantages of ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
Dimensional Accuracy & ConsistencyThese tough PLA filaments to be tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
Clog-Free, Bubble--to-use--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 210-220℃, bed 60℃ .
Wide Compatibility --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
Color: Black
Material: PLA
Spool Diameter: 8 inch - Spool Width: 2.5 inch - Spool Hub Hole Diameter: 2.20 inch
These 1.75mm PLA filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing
FAQs:
Why can't the filaments stick to the build bed?
1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature;
2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to an strong first layer adhesion;
3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
Temperature:
Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374℉~ 428℉),
Heated Bed Temp: 25°C - 60°C (77℉~ 140℉)
Filaments Diameter and Accur