!Before purchasing, make sure you have a VW T4 car with a 2.5 TDI engine. Our product is not compatible with cars with engines 1.9 / 2.4 / 2.0!

Hey there!

We've created an upgraded version of cruise control that will enhance your driving experience even more. Our product is sleek, carefully designed, and easy to install.

The cruise control has all the functionality of the original, plus it features backlighting on all switches, making it easy and intuitive to operate at night. Additional LEDs placed in the middle indicate whether the device is on or off.

The cruise control is installed in place of the original dashboard blanking plate and connects to a dedicated 4-pin connector located near the fuse box. If you want the product to light up, simply connect an additional wire to the ground to the steering column's mass wheel.

In the package, you receive: cruise control with an electrical harness and cable ties for securing the wires.

After installing the product, you must activate the cruise control function using VAGCOM/VCDS software! Without this, the cruise control will not work.

User manual:

• 1.       Install the device - remember to secure the wires so they do not obstruct access to the pedals.
• 2.       Activate the cruise control function in VAGCOM/VCDS (available on YouTube).
• 3.       Slide the switch down to activate the cruise control.
• 4.       Press the top button to maintain the current speed. Press and hold the top button to accelerate.
• 5.       Press the bottom button to return to the previously set speed. Press and hold the bottom button to decelerate.
• 6.       Pressing the brake/clutch pedal immediately deactivates the cruise control. If not, stop using the product!
• 7.       To turn off the cruise control without pressing the pedals, slide the switch up. The button backlighting will turn off, and the middle LEDs will change from yellow to blue.

If you still have any questions, feel free to reach out to us: t4parts.tp@gmail.com :)

FB: T4 Parts