Detail
-- 512 memory channels, full duplex operation with independent volume and squelch controls.
-- Power supply can be arbitrarily connected to 12V or 24V
-- It has strong speakers so that you can receive the signal in noise environment.
-- It has a unique physical structure, good heat dissipation effect, fast heat radiation in the high temperature environment.
-- The repeater function can be U to V ,or V to U.
-- The repeater function can be U to U,or V to V.
-- Two connectors for microphone,users can choose right side or left side to use the mic.
-- V/V, U/U simultaneous receive capability
-- Dual receive and dual band receive at the same time.
-- Single band display on the bigger screen.
-- Panel and host separated controller for flexible installation
-- Choose function for high/mid/low power. (H:UHF40W,VHF50W;M:25W;L:5W)
-- Different band width to choose from (25k for wide band,20k for middle band,or 12.5k for narrow band).
-- The FM panel is connected with the stereo function of vehicle, and the frequency (65-125mhz) can be preset.
-- Decrease noise.
-- Inverse frequency and offline functions.
-- Display on a large 240*64 LCD screen with dual row display or dual row letter.
-- Stereo-speaker on the separate panel.
-- Call in crowd, group or person.
-- Programming CTCSS/DCS can be set.
-- DTMF, 2-TONE, 5-TONE programming.
-- Various scan functions including MHZ,frequency, channel,CTCSS/DCS.
-- The backlight color of screen can be set.
-- The function of caller display(ANI identity).
-- Several speakers for your selection.
-- Personalized microphone and indicator light are convenient and intuitive to use.
-- Auto temperature, power supply protection
-- A variety of ways to start the cooling fan.
-- Scan frequency, channel, subaudio frequency at the same time.
-- ANI , group calls, VGCS, Stunning, Inhibit and awaken function.
-- Frequency range can be set VHF,TX-UHF,RX or UHF,TX-VHF,RX
-- APO auto power off.
-- Channel scan priority function, independent channel priority function.
-- Single pulse frequency (2100hz,1750hz,1450hz,1000hz)
-- Weather warning function.
-- Receiving function for wide band,air band.
-- Multi-function receiver, long wave 150k-500k, AM mid wave 500K-1.8M,short short wave 2-30M, air band 112-152M, FM 65-108M.
General: |
|
Frequency Range: |
A/B band RX: 136-174MHz 400-480MHz 470-520MHz B band RX: 153-279KHz(AM Radio) 0.5-1.8MHz(AM Radio) 2.3-30MHz(AM Radio) 64-108MHz(FM Radio) 113-137MHz(Air Band) TX: 136-174MHz 200-260MHz(Type USA) 400-480MHz 470-520MHz(option) |
Mode: |
F1D F2D F3E |
Channel Spacing: |
25KHz(Wide) 20K(Middle) 12.5K(Narrow) |
Frequency step: |
2.5KHz, 5KHz, 6.25KHz, 10KHz, 12.5KHz, 15KHz, 20KHz, 25KHz, 30KHz, 50KHz, 100KHz |
Power supply: |
DC12-24V plus 15%, negative ground |
Current: receiver: |
0.5A(standby) Transmit: 8.5A(144MH) 8.0A(430MHz) |
Frequency Stability: |
±2.5ppm -10 degree to +60 degree |
Operating temperature: |
-20 degree to +60 degree |
Dimensions: |
Remote controller: 150(W)*57(H)*33(D)mm Main Unit: 153(W)*45(H)*150(D)mm |
Weight: |
about 1.6kg |
Receiver(ETSI EN 300 086): |
|
Sensitivity(12dB SINAD): |
0.2uV or less (12 SINAD) |
Selectivity(-6dB): |
Wide: 12KHz or more, Narrow: 10KHz or more |
Selectivity(-60dB): |
Wide: 30KHz or less, Narrow: 24KHz or less |
Maximum audio output: |
2W@10% 8Ω 5% distortion |
Audio output impedance: |
4-16Ω |
Audio output: |
>2W@10% |
Transmitter(ETSI EN 300 086): |
|
Power output: |
Wide: 50W/25W/10W/5W(144MHz) Narrow: 30W/20W/10W/5W(430MHz) |
Modulation: |
variable reactance modulation |
maximum frequency deviation: |
Wide: ±5KHz, Narrow: ±2.5KHz |
Spurious emissions: |
-60dB or less |
Microphone impedance: |
2KΩ |
Data port impedance: |
10KΩ |