Messerschärfer Küche Blade Messerschleifer 360 Winkel mit 4 Schleifstein

Metal Type: Aluminum Alloy

Packing Size: 28*15*11cm

1.New metal. This sharpener is only one made by Aluminium alloy

2.New angel adjust system.Accurate setting of grinding angle.Angle memory system set

3.New flip fixture system flipped over to sharpen other side while retaining the same exact angle and edge (proprietary technology)

4.Innovative Patented Abrasive Holding System, Suitable for Various Abrasives

5.Silent smooth guidance system

6.Suitable for cutting edges of various shapes

7.Adjustable Ergonomics handle.Nice touch

The whetstones are Light, portable, and Anti-friction

Easy replace for the whetstone of the sharpener system,And easy sharpening all kinds of knives

For sharpening kitchen knife, scissors, chopper, hand hay cutter, shave knife, axe etc

Sharpening stone can use oil or water

Stone size: 15 x 2 x 0.5cm (L x W x H)

Grit: 120# ,320# ,600#,1500#

Color: As the pictures show

OPERATING INSTRUCTIONS

1. Wet the Cloth and ring it out. Wet the stone, with the STONE ARM

Off to the side so that the water runs away from the Pivot. Wipe off

Excess water

2. Position the blade on the BLADE TABLE with the knife handle

The machine and the edge parallel to the front of the GUIDE.

3. Place the STONE on the edge of the knife. Pull the knob all the way

Toward you, and slide the STone over to the HEEL of the blade

4. The Stroke: Push the STONE ARM forward and at the same time let it

Slide to the opposite side of the BLADE TABLE (diagonal motion)

PULL the STONE ARM back to the starting position along the same

Apply just enough pressure to get the stone to cut. Most of the

Sharpening is done on the push stroke. Don't pick the STONE up on the

Pull stroke, just let it slide on the edge. Make smooth, long, slow strokes

So you just bump the kiss gently Hold the KNOB loose in your hand so

It is free to follow the shape of the knife blade. Let the STONE slide from

Side to side in a straight line. Do not move in circles, as it wi

Concentrate all the sharpening in only one area of ??the edge

5. Go slowly. The STONES cut faster and are easier to control

When they are moving slowly. If you go fast, they just slide over the

Blade and do not cut

6. Clean the STONE and wipe the knife blade off every one or two

Passes (with the STONE ARM off to the side, so the water runs away

From the PIVOT). Put just enough water on the 5 TONE to cover the surface. This will float the metal and grit away

Rom the surface. Then wipe the STONE off with a damp terry clothrag.

Quantity:

Sharpener *1

Whetstones1 set (4 pcs)

Storage bag*1

Instruction manual*1