Feature
This part may also be known as: Drive Shaft Center Support Bearing
Top performance For long service life
100% tested For reliability and performance.
High Qaulity Steel construction softens shock to driveline components and tires.
High quality after-sales parts
Improving traction and lessening breakage.
About the Product
Drive Shaft Center Supports are rubber and metal parts bonded together around a bearing. These supports are used to stabilize drive shafts when the complete system is split into two or more sections. They are usually mounted close to where two sections come together. These supports not only aid in he reduction of noise, harshness, and vibration (NHV,) but also keep the drive shafts at the correct angles. Using the incorrect support can put the drive shaft at a different angle, resulting in u-joint and bearings wearing out quicker.
Fit for
1984-1988 Nissan 200SX
1989-1998 Nissan 240SX
1986-1994 Nissan D21
1984 Nissan Maxima
1993 Nissan Maxima
1986-1988 Nissan Micra
1986-1988 Nissan Multi
1989-1997 Nissan Pathfinder
1995-1997 Nissan Pickup
1989-1991 Nissan Stanza
2000-2004 Nissan Xterra
2003-2007 Infiniti FX35
2011-2012 Infiniti G25
2003-2008 Infiniti G35
2008-2012 Infiniti G37
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2006 Infiniti M35
2006-2007 Infiniti M40
Causes of bearing damage
- Lubrication Failure.According to a recent study, up to 80 percent of bearing failures are caused by improper lubrication.
- Contamination.Contamination is caused by foreign substances getting into bearing lubricants or cleaning solutions.
- Improper Mounting.In most instances, bearings should be mounted with a press fit on the rotating ring.
- Misalignment.Bent shafts, out-of-square shaft shoulders, out-of-square spacers, out-of-square clamping nuts and improper installation due to loose fits can cause misalignment, which may result in overheating and separator failure.
- False Brinelling.Rapid movement of the balls in a raceway while equipment is idle wears away at the lubrication.
- Corrosion.Moisture, acid, low-quality or broken-down grease, poor wrappings and condensation from excessive temperature reversals can cause corrosion that is abrasive to the finely finished surfaces of ball and roller bearings.
- Electrical Damage (Fluting).Constant passage of alternating or direct current, even with low currents, can lead to electrical damage
- Fatigue (Spalling).Spalling is often the result of overloading, an excessive preload, tight inner-ring fits and using the bearing beyond its calculated fatigue life.
- Overheating.verheating is generally the result of excessive operating temperatures and improper lubrication.
- Excessive Loads.Putting too much load on a bearing is another common cause of failure.
- Improper Storage and Handling.Improper storage exposes bearings to dampness and dust.
- Fit.A tight fit can be caused by excessive loading of the rolling element when interference fits exceed the radial clearance at operating temperatures.
Package Include
1 X Drive shaft bearing
Note
Our products have a strong adaptation, please confirm your model before buying, according to the model to buy the corresponding accessories.
If you are not sure about your model, you can send us your VIN code and we will help you confirm whether it is suitable.
If you have any questions about our products, please contact us.