|
|
|
|
|
|
|
|
|
|
|
|
|
|
The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.
Fit for:
2010-2012 Ford Fusion2011-2012 Lincoln MKZ2010-2011 Mercury Milan
Radiator Notes:
Specification:
Core Material: Aluminum
Tank Material: Plastic
Quantity: 1pcs Radiator
Warranty:1 Year limited
Direct Replacement
100% brand new radiator (as picture showed)
--------------------------------------------
? Installation guidelines provided in the box
? Premium OE hardware and fittings included in every box
? OE design to ensure exact fit, form and function for an easy drop-in installation
? Maximum cooling efficiency and perfect fit
? Leak-tested aftermarket radiator
? SO 9001 certified manufacturing plants
How to replace a new radiator?
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note:Do please keep children and pets away when replacing the radiator)
-----------------------------------------------------------------------------
Attention:
? project operation, the vehicle normal temperature 60 to 80 degrees.
? add detergent if the tank is too full can take some antifreeze.
Contact US:
Please confirm the compatibility before placing your order.
Any question or problem, please feel free to contact us.
| Item Specifics | |
|---|---|
| Brand | PARTHIGH |
| Manufacturer Part Number | PAR83745401H |
| Warranty | 1 Year |
| Placement on Vehicle | Front |
| Interchange Part Number | Engine Radiator and Cooling Fan |
| Listing Include | 1pcs Cooling Fan,1pcs Radiator |
| Other Part Number | Electric Radiator and Cooling Fan |
| Superseded Part Number | Electric Car Radiator and Cooling Fan |
| Condition | New |
| Type | Radiator and Cooling Fan |
| Fitment Type | Direct Replacement |
| Cooling Fan Voltage | 12 |
| Radiator Height(inch) | 25.79 |
| Radiator Width(inch) | 16.86 |
| Radiator Thickness(inch) | 1.03 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
(California Customers should pay more attention about it.)
PayPal Only.
Only PayPal accept in this selection.
99% of orders shipped within 24 hours.
2-8 days in transit.
Nice and strong packing.
UPS
, USPS
, fedEx
comes to be our first choice.
This item is backed by our 1-year warranty.
Refund will be given as money back or replacement
Item must be returned in original pacakge and packing the same as received.
Seller is responsible for the return if delivered item not the same as described or received damaged.
Note:
Buyers are responsible for the return shipping cost if the problem ids caused by buyer.
We only warranty cost of parts, any installation or other fees are non-refundable.
If you have a question about the item you should contact us before bidding.
Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
Our Customer Service Team is always online to answer.
Shop Category Hot Item
New List Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Radiator and Cooling Fan Assembly Car Electric For 2010-2012 Ford Fusion
The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.
Fit for: 2010-2012 Ford Fusion2011-2012 Lincoln MKZ2010-2011 Mercury Milan
Radiator Notes: Specification: Core Material: Aluminum Tank Material: Plastic Quantity: 1pcs Radiator Warranty:1 Year limited Direct Replacement 100% brand new radiator (as picture showed) -------------------------------------------- ? Installation guidelines provided in the box ? Premium OE hardware and fittings included in every box ? OE design to ensure exact fit, form and function for an easy drop-in installation ? Maximum cooling efficiency and perfect fit ? Leak-tested aftermarket radiator ? SO 9001 certified manufacturing plants
How to replace a new radiator? 1. Disconnect the battery. 2. Drain the radiator fluid into a suitable container. 3. Remove the old radiator: -Take off any plastic covers around the radiator. -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly. -Disconnect the radiator hoses from the radiator. -Disconnect the transmission cooling lines from the bottom of the radiator. -Remove any clamps, brackets, or screws holding the radiator inside its frame. -Lift the radiator up and out of the car. 4. Install the new radiator: -Slide the new radiator into place. -Connect any clamps or brackets that hold the radiator in place. -Connect the transmission cooling lines carefully. -Connect the engine cooling hoses to the radiator. -Replace the fan and fan shroud. -Reconnect the fan electrical connection. -Replace the plastic covers. 5. Fill the radiator with fluid. 6. Check your work to make sure that there are no leaks. (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan) Note:Do please keep children and pets away when replacing the radiator) ----------------------------------------------------------------------------- Attention: ? project operation, the vehicle normal temperature 60 to 80 degrees. ? add detergent if the tank is too full can take some antifreeze.
Contact US: Please confirm the compatibility before placing your order. Any question or problem, please feel free to contact us.
Warning
(California Customers should pay more attention about it.) Payment
Only PayPal accept in this selection. Shipping
99% of orders shipped within 24 hours. 2-8 days in transit. Nice and strong packing. UPS Return
This item is backed by our 1-year warranty. Refund will be given as money back or replacement Item must be returned in original pacakge and packing the same as received. Seller is responsible for the return if delivered item not the same as described or received damaged.
Note: Buyers are responsible for the return shipping cost if the problem ids caused by buyer. We only warranty cost of parts, any installation or other fees are non-refundable. About Us
If you have a question about the item you should contact us before bidding. Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
