FDA for Handpiece:
510(K) Number: K181691
Regulation Number: 872.4200
Classification Product Code: EFB
Subsequent Product Code: EGS
Adapter
Input: 100-240V~, 50/60Hz,1.5A
Power input: 50VA
Motor
Motor type
|
Direct current brushless motor
|
Voltage
|
DC36V
|
Operation mode
|
REV
|
Speed
|
2000-50,000 rpm
|
Torque
|
3.2N·cm
|
Coolant gas
|
6-8 NL/min(0.2MPa)
|
Sterilization
|
121℃20 minute,or 132℃15 minute
|
Motor size
|
Ф23×L145mm
|
Noise
|
≤60dB
|
Control unit
Model
|
EM1-A
|
Voltage
|
110-220V~
|
Motor size
|
L225×W90×H100mm
|
Fuse protector
|
T3.15AL250V
|
Water supply
Cooling water supply
|
0-100ml/min
|
I. Product use and analysis
1.Surgical operation:
A. The maximum speed of 50,000 rpm, to meet the clinical operation of doctors, fast
B. External physiological saline, commonly used by doctors for wisdom tooth extraction
2. Implant surgery:
Similar to the portable implant machine, but the torque is not enough to operate
3. Electric motor:
A. Advantages: higher speed than ordinary electric motors; with foot pedal function, convenient for doctors to operate.
B. Disadvantages: knob control, lagging behind the existing touch screen or button design in the market; no internal water outlet; handpiece tube is the same as that of the polisher, and the configuration is low.
4. Mechanic polisher:
A. Advantages: fast speed (the highest speed commonly available on the market is between 30,000-35,000, ours can reach 50,000 rpm)
B. Price is higher than the existing sanding machine on the market
II. Peristaltic pump motor design concept is as follows:
1. Solve the high cost problem of using implant system to do surgery.
2. Solve the problem of using ordinary grinding machine can't supply medicine water to cool down and reduce the risk of wound infection.
3. Can be used with 1:5 bending machine / 1:4.2 bending machine / bone cutting handpiece / surgical straight machine.
4. Suitable for use in school training courses, providing a low-cost operating equipment.
5. Product durability and stability.
6. The product adopts a modular design, maintenance, just replace the corresponding module. Save the cost and time.
III. Peristaltic pump motor selling points are as follows:
1. maximum speed of 50,000rpm fast, higher than the ordinary electric motor (40,000rpm), strong cutting power;
2. with foot pedal, freeing the doctor's hands, convenient operation (ordinary electric motor without foot pedal function);
3. water flow foot pedal, speed foot pedal, double foot pedal control, easy to operate;
4. simple operation, easy to operate;
5. can be connected externally to physiological saline, can be used for surgical procedures such as wisdom tooth extraction, the price is much lower than the common implant machine on the market, micro power system;
6. can be used as a backup machine for the implant system, with high cost performance;
7. can be used with 1:4.2 bending machine / bone cutting handpiece / surgical straight machine.