Feature: 1. The dispenser is used to precisely point, inject and apply glue, paint and other liquids in the product process to each precise location.2. The glue dispenser is made of aluminum alloy, with plastic edging, not easy to rust and corrosion, durable. 3. The dispenser supports automatic timing, according to your work needs to set the time to achieve perfect results. 4. The dispensing machine has a complete range of accessories, needles of different specifications and multiple replacement cartridges to meet various needs. 5. Commonly used in manufacturing industries such as electronics, lighting, automobiles, industry, and construction. Specification: Item Type: Glue Dispenser Package List: 1 x Glue Dispenser Host 3 x Piston 3 x Dispensing Tube 1 x Needle Assembly 12 x Needle 1 x Power Cord 1 x Foot Switch 1 x O-Ring 1 x Air Connection Intubation 1 x User Manual 1 x Bottle Rack Note: 1. The maximum pressure of the input high‑pressure gas should not exceed 7bar (1000psi), and the working pressure of the glue machine should not exceed 5.5bar (78psi). If the working pressure is above 4bar, please use aluminum alloy connectors instead. 2. If possible, the glue used should be stored at a constant temperature of 5℃ to ensure that the depth does not change greatly during use and to avoid excessive concentration, which may cause difficulty in and cannot be dripped. When using, it must be diluted according to the manufacturer's instructions before use. 3. The rubber material must be fully stirred evenly before work to ensure the same amount of dripping 4. When working in AUTO state, it is generally appropriate to adjust the air pressure inside the machine at 1‑2.7bar (15‑40psi). 5. When working in AUTO state, according to the actual situation, timely remove the glue staying at the needle nozzle. After these rubbers are cured, it will cause the needle to discharge and reverse pumping will not work. 6. In the AUTO state, the strength of the vacuum tube's return air is not the bigger the better, but it is adjusted to the appropriate position according to the air pressure, the working cycle, the size of the drip, etc. If the amount of air return is too large, it will overturn the piston and destroy the normal jobs 7. At the end of the work, the syringe must be cleaned in time, otherwise, it will be very difficult to disassemble the syringe after the rubber is cured. Generally, the cleaning method of rubber material is simple. Put the relevant parts in the water of the wiper for 5‑10 minutes, and the rubber material can be easily removed.
1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee. 3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase. 4. All disputes arising from the duties will be submitted to ebay for solution. 1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails. 2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
|