Description:

This Hydraulic Knockout Kit Has Various Cutting Tools for Many Materials Such As Aluminum, Steel and Plastic. It Works Without Scratches on the Surface of Workpieces and Is Often Used in Metallurgy, Gasoline, Electrical Appliances, Ships, Machines, Etc. Used.

Hydraulic Knockout Kit

Model Maximum Working Pressure Maximum Thickness for Metal Maximum Working Stroke Cutting Tools

15 Tons 10

Cutting Tool 15 Tons 3.5 Mm 25 Mm 10dies: 16 Mm, 20 Mm, 26.2 Mm, 32.6 Mm, 39 Mm, 51 Mm, 63 Mm, 63 Mm, 76 Mm, 89 Mm, 101 Mm

Soft Steel Plate: Max 4mm

Stainless Steel Plate ：Max 2mm

Features: * High Efficiency and Labor Savings - with Hydraulic Mechanism

* Suitable for Various Tasks - with Different Cutting Tools

* Well-designed Structure - Reliable Performance and Easy Maintenance

Operating Instructions:

1. Punch a Workpiece with an Electric Drill to Drill a Guide Hole Before Cutting the Hydraulic

Use Hole Punches.

2. Turn the Pull Rod into the Screw of the Piston Cylinder, Ring the Rod with a Seal and Guide It with the Rod Through the Lower Cutting Die.

3. Insert the Pull Rod into the Guide Hole and Turn the Upper Punching Mold Through the Rod so That the Upper Punching Mold, the Workpiece and the Lower Punching Die Are Firmly Connected to Each Other.

4. Close the Overflow Valve Clockwise and Press the Hand Lever down Repeatedly for the Piston Pump to Work. When the Oil Pressure Rises and the Shear Force Between

When the Punching Die Increases, the Punching Die Begins to Punch Until It Is Finished. After Punching, the Hand Lever No Longer Needs to Be Pressed Immediately.

5. Release the Overflow Valve Counterclockwise to Reduce the Oil Pressure.

6. After Punching, the Punching Set Should Be Removed for Thorough Cleaning.

Size: 47.00 * 24.00 * 15.00 Cm

Gw: 25 Kg

Package Content:

1 X Hydraulic Hole Punch

2 X Kleash Pull Rods

1 X Carrying Bag

1 X Manual

2 X Large Pull Rod (for 15 Tons)

2 X Gasket

1 X Hose

10 X Cutting Tools