- Specification:
- Item Type: Print Head
- Material: ABS
- Weight: Approx. 95g / 3.4oz
- Package List:
- 1 x Print Head 1.soft plug repair:
- (1) soft plugging refers to a variety of reasons for the ink in the nozzle viscosity of the broken line due to failure. Sometimes only attached to the surface of the ink outlet nozzle, generally dipped in the original ink can be restored after several cleanings;
- (2) use the printer driver application tools in the printhead cleaning function to clean.
- 2.hard plug repair:
- (1) soak method
- Scope of application: less obstructed, the solution: first find a flat metal container with a flat bottom, add a little 95% concentration of organic solvents in the container alcohol solution, alcohol should be just submerged print head stainless steel wrapped but do not let the PCB board in contact with the location of alcohol. Soak time generally ranging from 2 hours to 4 days.
- (2) pressure cleaning method
- Scope of application: the situation is more serious obstruction, the solution: a disposable infusion set of plastic tubes or needles partially made of syringes and print head ink supply interface between the mouth (the combined parts must be tight), the interface production is completed, the head of the print head will be placed in the concentration of 95% of the organic solvents in the alcohol, through the print head will be alcohol inhalation (note that only can be inhaled) syringe needle, inhalation a few times. The advantage is that the cleaning effect is good. General obstruction of the print head can be cleaned by this method. It is worth noting that the inhalation of alcohol when the force should be uniform and consistent back and forth, generally does not cause physical damage. Just make the interface needs to be due to the actual situation of their own handmade, so you need to have a professional maintenance technicians with a certain degree of hands-on ability to do hands-on repairs, the production of a good tool to ensure long-term use.
- Please Note: The product only applies to weak soluble ink, if there is a print blank or print head clogging, you should carry out a large number of inking ink, exclude the air, check whether the ink capsule is clogged, you can manually insert a syringe into the ink capsule for ink pumping, and then the machine is set to automatically clean the next, or not, it is necessary to replace the nozzle line cable can be.