Features:
Tile ceramic positioning T shape leveler system paving tile correction equalizer.
Designed to keep the tile balance on the same horizontal position.
Great for preventing tiles from moving while curing.
Perfect for making tile laying speed faster and improving working efficiency.
Specifications:
Clips:
Material: Plastic
Color: Transparent
Size: 35*35mm
Tile Gap Wider: 1.5mm
Use Tile Thickness: 3mm-12mm
Suitable For: Floor tiles and wall tiles
Wedges:
Material: Plastic
Color: Yellow
Size: approx. 90*22*15mm
For Tile Thickness: between 3-12mm
Plier:
Material: Metal body with plastic handle
Color: As the pictures show
Size: approx. 235*25mm
Package included:
100 Spacers+100 Wedges+1 Plier or 200 Spacers+200 Wedges+2 Plier
Using Tips:
Paving the first tile, leave more than 2mm (use with cross spacer). Close to the tiles.
Insert T-shaped needle along the gap in the tile.
Then 180 degree rotation,T-shaped needle stuck at the bottom of the two tiles.
Adjust the caps with your hand/special wrench until the two tiles are on the same level.
About 5-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-· needle until the word, take out.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
Tile ceramic positioning T shape leveler system paving tile correction equalizer.
Designed to keep the tile balance on the same horizontal position.
Great for preventing tiles from moving while curing.
Perfect for making tile laying speed faster and improving working efficiency.
Specifications:
Clips:
Material: Plastic
Color: Transparent
Size: 35*35mm
Tile Gap Wider: 1.5mm
Use Tile Thickness: 3mm-12mm
Suitable For: Floor tiles and wall tiles
Wedges:
Material: Plastic
Color: Yellow
Size: approx. 90*22*15mm
For Tile Thickness: between 3-12mm
Plier:
Material: Metal body with plastic handle
Color: As the pictures show
Size: approx. 235*25mm
Package included:
100 Spacers+100 Wedges+1 Plier or 200 Spacers+200 Wedges+2 Plier
Using Tips:
Paving the first tile, leave more than 2mm (use with cross spacer). Close to the tiles.
Insert T-shaped needle along the gap in the tile.
Then 180 degree rotation,T-shaped needle stuck at the bottom of the two tiles.
Adjust the caps with your hand/special wrench until the two tiles are on the same level.
About 5-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-· needle until the word, take out.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
